The processing of low-grade, lead-containing practical ores requires fine grinding to liberate galena and enhance flotation recovery. The ball mill is still one of the most common approaches used in industry for fine grinding. This study investigated the effect of the grinding parameters in a ball mill on the fine grinding product of galena and on flotation performance. The grinding product had a particle size below 30 μm, which was classified into +25 μm, −25 + 10 μm, and −10 μm fractions. Grinding experiments showed that modifications to the grinding concentration, media proportion, and filling ratio exerted significant effects on the yields of the +25 μm and −10 μm fractions. Flotation experiments showed that the yield of −10 μm particles negatively affected the flotation performance of galena. Discrete element method simulation results revealed that an increase in the motion velocity of the media group enhanced attrition effects during fine grinding, promoting the generation of −10 μm particles. The higher yield of −10 μm particles facilitated a smaller contact angle and smaller agglomerate size, resulting in lower recovery. To optimize the particle size distribution and improve fine-grained galena flotation recovery, it is essential to reduce the attrition of the grinding media on the mineral.

In the flotation separation process of a Cu-Mo-W polymetallic ore, the wastewater from the scheelite cleaning flowsheet contains large numbers of residual flocculants and metal ions, and the separation of chalcopyrite and molybdenite requires a large number of environmentally harmful depressants. Therefore, it is necessary to find new methods to reduce the environmental and cost pressures of wastewater treatment and the use of depressants. In this work, the flotation wastewater from the scheelite cleaning flowsheet for the separation of chalcopyrite and molybdenite by selective surface passivation was investigated for the first time. Flotations of single minerals and artificially mixed minerals with or without immersion pretreatment in the presence and absence of aeration were performed. The results showed that pulp pH had no effect on the flotation of either mineral, and a molybdenite recovery of 93.22% with a chalcopyrite recovery of 10.77% was achieved under the conditions of 10 days of immersion pretreatment with aeration, 350 mg/L of kerosene, and 100 mg/L of MIBC. By combining the electrochemical cyclic voltammetry analysis and characterization by XRD and SEM, the selective surface passivation mechanism of chalcopyrite was discussed, which could be due to the coverage of the insoluble oxidation products, especially jarosite. This work has simultaneously achieved the depressant-free flotation separation of molybdenite and chalcopyrite and the reuse of scheelite flotation wastewater, which is of great significance for environmental protection and cost saving.

Olfactory dysfunction (OD) is a common sequela of SARS-CoV-2 infection, but its prevalence and associated factors beyond 2 years remain unclear. In this multicenter observational study, we assessed 155 recovered COVID-19 patients approximately three years after infection and included 170 age-matched healthy controls as a reference group. Demographic, clinical, psychological, and sleep-related data were collected through structured interviews. Olfactory function at the 3-year assessment was objectively evaluated using Toyota–Takagi (T&T) olfactometry. Paired baseline-to-follow-up T&T data were available only for a small exploratory subgroup of nine patients and were analyzed descriptively. At follow-up, 7 of 155 recovered patients (4.5%) met our T&T-based definition of persistent quantitative olfactory dysfunction, all of whom were older than 50 years. Emotional and sleep disturbances were also common, with descriptive trends toward higher frequencies among women and older individuals. Exploratory analyses suggested that insomnia (AIS > 6; OR 5.35, 95% CI 1.07–26.60; p = 0.033) and anxiety (HAMA ≥ 7; OR 10.54, 95% CI 1.21–91.82; p = 0.04) were associated with persistent T&T-defined quantitative OD, although the small number of outcome events limited statistical precision. These findings indicate that a small proportion of COVID-19 survivors have persistent objective OD 3 years after infection and that persistent OD is associated with anxiety and insomnia.

In the case of a Cu-Mo-W polymetallic ore, the wastewater from the scheelite cleaning flowsheet contains large amounts of residual flocculants and metal ions, and the separation of chalcopyrite and molybdenite require a large number of environmentally harmful depressants. Therefore, it is necessary to find new methods to reduce the environmental and cost pressures of wastewater treatment and the use of depressants. In this work, the flotation wastewater from scheelite cleaning flowsheet for the separation of chalcopyrite and molybdenite by selective surface passivation was investigated for the first time. Flotations of single minerals and artificially mixed minerals with or without immersion pretreatment in the presence and absence of aeration were performed. The results showed that pulp pH had no effect on the flotation of either mineral, and a molybdenite recovery of 93.22% with chalcopyrite recovery of 10.77% was achieved under the conditions of 10 days of immersion pretreatment with aeration, 350 mg/L of kerosene, and 100 mg/L of MIBC. By combining the electrochemical cyclic voltammetry analysis and characterization by XRD and SEM, the selective surface passivation mechanism of chalcopyrite was discussed, which could be due to the coverage of the insoluble oxidation products, especially jarosite. This work has simultaneously achieved the depressant-free flotation separation of molybdenite and chalcopyrite and the reuse of scheelite flotation wastewater, which is of great significance for environmental protection and cost saving.