The paper presented a hybrid micro-grid renewable energy of different energy sources to generate uninterrupted electricity for the Agu-Amede village using PV, diesel, biogas, and battery. The system optimization was performed to determine techno-economic analysis and energy generated using HOMER software. The energy generated by the hybrid system was able to meet the demand load of the village at all levels of biomass production with surplus electricity in each case when the production of the biogas system varied between 0.5 tons to 3 tons. At biomass production of 3 tons, the total energy generated demand is 480693 kWh with a surplus of 121762 kWh. Again, the hybrid PV and biogas system generate total energy of 98714 kWh (20.50%) and 381979 kWh (79.50%), respectively. The net present cost (NPC) and cost of energy (COE) of the base case architecture (diesel) measured are $1230000 and $0.267/kWh, respectively. Therefore, between 2.5 tons and 3.0 tons of biomass penetration, the energy production of biogas increased, and the diesel system was removed from the hybrid system setup. This is because the availability of biogas is almost sufficient to meet the load demand at a lower cost and solar PV architecture was added to the hybrid system to balance energy production.
1 March 2023 in European Journal of Artificial Intelligence and Machine Learning
With the advent of several fault detection techniques in modern control systems design, this paper adopted the Artificial Neural Network (ANN) Fault Detection scheme for the Fault Detection of the Attitude Control System for a Communication Satellite. In satellite applications, telemetry data can be very large, and ANN is best suited for network modeling involving large sets of data. The availability of real satellite data from Nigcomsat-1R communication satellite provided a practical platform to assess the fault detection algorithm. Results obtained showed a good correlation between raw satellite telemetry data and Neural Network model-generated results for subsequent fault detection. The fault detection models were able to detect faults, log them and provide a notification to enhance subsequent isolation and rectification. Momentum Wheel Speed and Torque were used to investigate the performance of the wheels while the Momentum Wheel Voltage and Current helped to monitor the wheel’s health state. A fault is detected if the absolute difference between original output (MW Torque) and the NN Torque output is greater than 0.012. With this, an accuracy of 100% and mean squared error of 9.8489e-6 were achieved.
4 September 2020 in European Journal of Engineering and Technology Research
The research work demonstrated the use of adaptative and comparative paradigm to calibrate and validate Hall Effect flowrate sensor’s related performance data. The experimental testbed used for the research work is composed of an IoT based platform integrated into a water pipe network. The use of IoT largely assisted in facilitating a well-coordinated and flexible paradigm for efficient data collections and analysis. Correlated and Associative analysis on data obtained shows a strong significant relationship (R2=89%) between the rate of Pulse count and rate of change in differential volume leading to the derivation of a model that is helpful in determining of volumetric rate and quantity of liquid dispense as function of pulse count generated from a Hall Effect flowrate sensor.
19 May 2025 in American Journal of Electrical Power and Energy Systems
Thermal power system are major contributors to power generation and are mostly powered by natural gas, coal, and diesel, all of which are derivatives of petroleum. Aside from their inability to meet energy demands, they have led to growing environmental and economic challenges. Dependence on thermal based power system has further necessitated a transition to sustainable energy systems. This article presents a literature review and statistical analysis based on data obtained from 78 articles published between 2017 and 2025 addressing renewable energy, hybrid power systems, energy storage, optimization strategies, and grid stability. Analysis shows that 50% of the reviewed studies were published in 2024, reflecting a rising research interest. Lithium-ion batteries dominate energy storage (65%), followed by solid-state batteries (10%) and hydrogen fuel cells (6%). Optimization methods are increasingly being adopted, with artificial intelligence-based approaches accounting for 40% and metaheuristic algorithms such as genetic algorithms and particle swarm optimization comprising 30%. However, grid stability continues to be a central challenge as highlighted in 55% of the studies reviewed. Therefore, future work should focus on advanced optimization models to enhance system efficiency and stability. Promising approaches could include techniques that integrate voltage sensitivity analysis with artificial intelligence driven optimization models to improve grid resilience and enable real-time energy management. Furthermore, artificial intelligence driven predictive control, block-chain based energy trading, and IoT enabled smart grids are expected to advance energy networks. By leveraging these innovations, renewable energy sources and thermal power systems can be seamlessly integrated, ensuring a more resilient and sustainable energy future.
16 June 2026 in e-Prime – Nexus of Electrical, Electronic, and Intelligent Engineering