Electric vehicles (EV) are widely seen as a sustainable alternative to gasoline vehicles to decrease emissions and dependence on fossil fuels. However, range anxiety, limited range, long charging time, and insufficient charging infrastructure have affected EVs’ adoption. High-end batteries and chargers can decrease the charging demand and charging time, respectively, and increase the EVs’ market share. Based on a recently developed intercity model, this study investigates the potential impact of different battery and charger technologies on the optimal configuration of charging infrastructure for the Michigan intercity network in 2030. The major contribution of this study is not only considering the effects of a variety of technology advancements on infrastructure requirements but also developing a realistic modeling framework with the consideration of the intercity network of Michigan, using realistic assumptions and parameters calibrated through multiple stakeholders’ meetings. Therefore, the parameters and findings of this study can be used for future studies requiring realistic data. This study finds that the location of charging stations merely depends on the battery capacity while the charging power dictates the required number of chargers. Furthermore, high-tech charging infrastructures showed to be the cheaper option compared to low-tech ones.
16 April 2020 in Transportation Research Record: Journal of the Transportation Research Board
Estimation of vehicular emissions at network level is a prominent issue in transportation planning and management of urban areas. For large networks, macroscopic emission models are preferred because of their simplicity. However, these models do not consider traffic flow dynamics that significantly affect emissions production. This study proposes a network-level emission modeling framework based on the network-wide fundamental diagram (NFD), via integrating the NFD properties with an existing microscopic emission model. The NFD and microscopic emission models are estimated using microscopic and mesoscopic traffic simulation tools at different scales for various traffic compositions. The major contribution is to consider heterogeneous vehicle types with different emission generation rates in a network-level model. This framework is applied to the large-scale network of Chicago as well as its central business district. Non-linear and support vector regression models are developed using simulated trajectory data of 13 simulated scenarios. The results show a satisfactory calibration and successful validation with acceptable deviations from the underlying microscopic emissions model regardless of the simulation tool that is used to calibrate the network-level emissions model. The microscopic traffic simulation is appropriate for smaller networks, while mesoscopic traffic simulation is a proper means to calibrate models for larger networks. The proposed model is also used to demonstrate the relationship between macroscopic emissions and flow characteristics in the form of a network emissions diagram. The results of this study provide a tool for planners to analyze vehicular emissions in real time and find optimal policies to control the level of emissions in large cities.
This paper explores an important problem under the domain of network modeling, the optimal configuration of charging infrastructure for electric vehicles (EVs) in urban networks considering EV users’ daily activities and charging behavior. This study proposes a charging behavior simulation model considering different initial state of charge (SOC), travel distance, availability of home chargers, and the daily schedule of trips for each traveler. The proposed charging behavior simulation model examines the complete chain of trips for EV users as well as the interdependency of trips traveled by each driver. The problem of finding the optimum charging configuration is then formulated as a mixed-integer nonlinear programming problem that considers the dynamics of travel time and travel distance, the interdependency of trips made by each driver, limited range of EVs, remaining battery capacity for recharging, waiting time in queue, and detour to access a charging station. This problem is solved using a metaheuristic approach for a large-scale case network. A series of examples are presented to demonstrate the model efficacy and explore the impact of energy consumption on the final SOC and the optimum charging infrastructure.
5 August 2022 in Transportation Research Record: Journal of the Transportation Research Board
Promoting battery electric buses (BEBs) can reduce fuel consumption and air pollution from the transit system. A complete transition from the current diesel fleet to BEBs is costly and time-consuming. Thus, the intermediate solution is a combination of diesel, hybrid, and BEBs. Therefore, a planning framework is required that simultaneously tackles three contiguous aspects of transit electrification and their interconnections, namely charging infrastructure, fleet configuration, and scheduling. Accordingly, this study considers a mixed fleet of diesel and BEBs. It aims to concurrently find (i) the optimal location and capacity of charging infrastructure, considering micro-grid specifications, the impact of distributed energy resources, and time-of-use electricity rates and (ii) optimum operation and refueling strategies. Another objective of this study is to capture the impacts of adverse weather conditions on transit electrification. A mixed-integer problem is proposed and solved using a metaheuristic algorithm based on simulated annealing to minimize system costs, including infrastructure, fleet, and operation costs. A subnetwork of transit in Worcester, Massachusetts, is selected as a case study, including three routes, five candidate charging locations, and three bus types. Findings suggest that BEBs can operate and serve the passenger demand with sufficient charging infrastructure. Sensitivity analyses show that even though high-power chargers are more expensive per piece, they reduce the overall cost as fewer chargers are required. The cost rises for chargers with power of 350 kW or more. It is worth noting that the benefits of BEBs are more significant in smaller buses and are heavily affected by adverse weather conditions.
11 June 2022 in Transportation Research Record: Journal of the Transportation Research Board
Electric vehicles (EVs) are known to reduce emissions and fossil fuel dependency. However, the limited range, long charging time, and inadequate charging infrastructure have hampered the adoption of EVs. The current EV charging infrastructure planning studies and tools require detailed information, extensive resources, and skills that can be a significant barrier to urban areas for finding the required charging infrastructure to support a targeted EV market share. This study generates regression models to estimate the number of direct current fast charging stations and the chargers to support the EV charging demand for urban areas. These models provide macro-level estimates of the required infrastructure investment in urban areas, which can be easily implemented by policy-makers and city planners. This study incorporates data obtained from applying a disaggregate optimization-based charger placement model, developed recently by the same authors, for multiple case studies to generate the required data to calibrate the macro-level models, in the state of Michigan. This simulated data set includes the number of charging stations and chargers for each market share, technology advancement scenario, and the transportation network topology. The results show that the number of charging stations reduces with battery size and charging power and increases with EV market share and the road network lane length. The number of chargers reduces with charging power, whereas it increases with battery size, EV market share, and vehicle miles traveled in the system. The model developed here can be applied to any state having urban characteristics and weather conditions similar to Michigan.