Qingchang Guo

Dr. Qingchang Guo


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
LGLinyuan Guo
Linyuan Guo
RZRan Zhou
Ran Zhou
QGQingchang Guo
Qingchang Guo
LMLiran Ma
Liran Ma
CHChuxiong Hu
Chuxiong Hu
JLJianbin Luo
Jianbin Luo
This paper aims to solve the spatial trajectory tracking control problem of underactuated autonomous underwater vehicles (AUVs) in the presence of system parameter uncertainties and complex external disturbances. To accomplish this goal, a model–data-driven learning adaptive robust control (LARC) strategy is introduced for AUVs. Firstly, a serial iterative learning control (ILC) approach is introduced as feedforward compensation, and then the corresponding trajectory tracking error dynamics model, the Feedforward Compensation–Line of Sight (FFC-LOS) guidance law, and the feedforward compensation-based kinematics controller are designed. Secondly, the dynamics controller is designed for AUVs, which consists of a linear feedback term, a nonlinear robust feedback term, an adjustable model compensation term, and a fast dynamic compensation term. In this control framework, the robust control and fast dynamic compensation parts are utilized to deal with nonlinear uncertainties and disturbances, the projection-type adaptive control part solves the influence caused by the uncertainty of system parameters, and the serial ILC part that is a data-driven learning method can further improve the trajectory tracking accuracy for repetitive tasks. Finally, comparative simulations under different scenarios and different types of disturbances are performed to verify the effectiveness of the proposed control strategy for AUVs.

20 April 2026 in Materials
Verified
Journal Article
Open access
PDF file
PLPanpan Liang
Panpan Liang
GWGuanbo Wang
Guanbo Wang
QGQingchang Guo
Qingchang Guo
Maojun LiMaojun Li
Maojun Li
Pan GongPan Gong
Pan Gong
This study focuses on the of key engineering parameters for the repair of shipboard carbon fiber reinforced polymer composite structures using a scarf patch repair configuration. A three-dimensional finite element model was developed to systematically analyze the effects of repair location (center-symmetric, diagonal-asymmetric, and edge-unidirectional) and cut-out depth (2.0 mm, 3.0 mm, and 4.0 mm) on the mechanical response of the repair structure. The results indicate that although the local stress level of the center-symmetric repair is slightly higher, it provides a continuous load transfer path with more balanced stress distribution, demonstrating the best overall mechanical performance. When the cut-out depth is 3.0 mm, the repair structure achieves an optimal balance between stress uniformity and displacement coordination, effectively reducing the risk of early adhesive layer failure and local buckling. This study identifies the optimal parameter combination for scarf patch repairs, providing important theoretical foundations and references for the design of repair processes and the standardization of engineering practices in shipboard composite structures.

26 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
WGWenbin Gui
Wenbin Gui
ZXZengshi Xu
Zengshi Xu
QGQingchang Guo
Qingchang Guo
LMLiran Ma
Liran Ma
JLJianbin Luo
Jianbin Luo
Large-scale metal-lined composite overwrapped pressure vessels are promising for cryogenic liquid oxygen storage, but their response is governed by the interaction among dome geometry, thermal mismatch and internal pressure. This study investigates the influence of dome aspect ratio (DAR), defined as the ratio of the major to minor semi-axis of an ellipsoidal dome, on vessel thermomechanical behavior. Six DAR values from 1.25 to 2.50 were analyzed using a three-dimensional finite element model with temperature-dependent properties of Type 304 stainless steel and T700-grade carbon/epoxy. Three loading conditions were considered including 1.0 MPa internal pressure at 293 K, cooling from 293 to 90 K, and pressurization at 90 K. At 293 K, increasing DAR intensified stress localization near the dome–cylinder transition. Cryogenic cooling produced incompatible free deformations between the liner and overwrap, generating substantial constrained thermal stresses after bonding. Subsequent pressurization further increased the liner stress but partly offset the cooling-induced compressive stress in the overwrap. Under cryogenic and combined loading, DAR had little influence on the central cylindrical section, but markedly changed the stress magnitude, sign and localization in the domes and transition regions. These findings indicate that dome shapes for cryogenic vessels should not be selected solely from room-temperature pressure-based conclusions, because thermal mismatch and cryogenic pressurization can fundamentally alter the structural response.