Shihui Yang

Mr. Shihui Yang


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2026 in Energies
Verified
Journal Article
Open access
PDF file
WLWei Lu
Wei Lu
WLWendi Liao
Wendi Liao
SYShihui Yang
Shihui Yang
ZQZelian Qin
Zelian Qin
QJQihang Jin
Qihang Jin
KCKexin Chen
Kexin Chen
During the marine transport of liquid hydrogen, heat ingress leads to the generation of boil-off gas (BOG), which increases the pressure in the liquid hydrogen storage tanks. Effective BOG management is therefore essential to ensure tank safety and minimize hydrogen loss. This study develops a cryogenic compression recovery and storage system for BOG generated during the marine transport of 160,000 m3 liquid hydrogen. The core process involves compressing a portion of the BOG and subsequently utilizing the BOG’s inherent cold energy to cool the compressed hydrogen, ultimately enabling the storage of the final cryogenic compressed hydrogen product. ASPEN-PLUS software was employed to analyze the proposed system’s specific energy consumption (SEC) and ψ (hydrogen density/SEC) for producing cryogenic compressed hydrogen (CcH2) across a temperature range of 53 to 110 K and a pressure range of 40 to 100 MPa. Seven optimal sets of state parameters were identified for the cryogenic compressed hydrogen product. Based on a specified optimal parameter set of 80 K and 50 MPa, a simulation of the proposed system’s performance yielded a SEC of 2.25 kWh/kg CcH2 and an exergy efficiency of 87.88% with BOG feed at 53 K and 0.1 MPa, along with the exergy loss and exergy efficiency for each component. Compared to a BOG re-liquefaction system and a MRJT CcH2 system under identical conditions, the proposed system achieves 31.81% and 64.9% reduction, respectively, in SEC and 17.32% and 94.6% improvement, respectively, in exergy efficiency. Furthermore, the effects of feed temperature and cryogenic compressed hydrogen product mass flow rate on the proposed system’s SEC and exergy efficiency were investigated.

22 April 2026 in Energies
Verified
Journal Article
Open access
PDF file
WLWei Lu
Wei Lu
YYYuying Yang
Yuying Yang
HLHua Liao
Hua Liao
HQHaiyi Qin
Haiyi Qin
SYShihui Yang
Shihui Yang
XWXinyan Wang
Xinyan Wang
Efficient thermal management of lithium-ion batteries is critical for the safety, performance, and longevity of electric vehicles. This work numerically investigates a battery thermal management system (BTMS) for a LiFePO4 battery, featuring a liquid-cooling plate with novel droplet-shaped turbulators and coolant with different nanofluids. Computational Fluid Dynamics (CFD) simulations were employed to analyze the effects of cooling channel geometry, nanofluid type, nanoparticle volume fraction, coolant inlet velocity, and battery discharge rate on the system’s thermal performance and pressure drop. Results show that the droplet-shaped channel reduces the maximum battery temperature by 1.64 K compared to a conventional straight channel, owing to enhanced turbulence and larger heat-transfer area. Among different coolants, the 6% Cu–water nanofluid demonstrated the highest cooling effectiveness due to its superior thermal conductivity. To balance competing objectives, a multi-objective optimization using Response Surface Methodology (RSM) and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) was performed. The optimal design was achieved with a coolant velocity of 0.097 m/s and a volume fraction of Cu nanoparticle of 3.85%, which maintained the maximum battery temperature of 299.7 K with a minimal pressure drop of 26.27 Pa at a 1.03 C discharge rate. These findings highlight that a BTMS combining droplet-shaped turbulators with a Cu–water nanofluid provides a highly effective and energy-efficient thermal management strategy.