In this work, we proposed a high-efficiency and low-complexity encoding algorithm and its corresponding implementation structure during the design and implementation process of an LDPC encoder and decoder. This proposal was derived from extensive research on and analysis of standard encoding algorithms and recursive iterative encoding algorithms, specifically targeting the problem of high computational complexity in encoding algorithms. Subsequently, we combined binary phase-shift keying modulation mode and additive white Gaussian noise channel transmission with the min-sum decoding algorithm to realize the (1536, 1024) LDPC codec. This codec was uniformly quantized with a (6, 2) configuration, executed eight iterations, and achieved a 2/3 code rate in the IEEE802.16e standard. At the bit error rate (BER) of , the codec’s BER obtained by the proposed coding algorithm was about 0.25 dB lower than the recursive-iterative coding algorithm and was about 1.25 dB lower than the standard coding algorithm, which confirms the correctness, effectiveness, and feasibility of the proposed algorithm.
The role of unmanned aerial vehicles (UAVs) in time-sensitive missions such as low-altitude reconnaissance and disaster rescue has gained increasing significance. To address the challenge of visual localisation for UAVs operating in complex terrains under Global Navigation Satellite System (GNSS)-denied environments, this paper proposes an improved adaptive gradient-damped Newton approach to mitigate the trade-off between terrain non-convexity and computational real-time performance. The proposed approach incorporates a terrain-gradient-based dynamic step-size adjustment mechanism that adaptively captures non-linear terrain characteristics in real time and effectively reduces the numerical oscillations typically observed in steep regions when using the standard Newton method. In addition, a tightly coupled vision–geometry framework was developed to constrain cumulative drift during long-range flight. Monte Carlo simulation results demonstrate that the proposed algorithm maintains submeter localisation accuracy while achieving approximately a three-fold improvement in computational efficiency compared with traditional grid-based methods, and a 27.4% increase in convergence speed relative to the standard Newton method. Experiments conducted under high-noise conditions and highly undulating terrains indicate that the approach exhibits strong convergence stability, offering a computationally efficient and robust solution for UAV navigation.