Equal-channel angular pressing (ECAP) was performed on a Mg (6 wt %) Zn alloy at temperatures from 160 to 240 °C and the microstructures and mechanical properties were studied using optical microscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and an electronic universal testing machine. The results showed that ECAP was effective for grain refinement and a bi-modal grain structure formed at low temperatures, which was stable during ECAP from 160 to 200 °C. MgZn₂ phase and Mg₄Zn₇ phase were generated during the ECAP process. The mechanical properties remarkably increased after two repetitions of ECAP. However, the strengths could not be further improved by increasing the plastic deformation, but decreased when ECAP was performed between 200 and 240 °C. The mechanical properties of the ECAP Mg-6Zn alloy was determined by a combination of grain refinement strengthening, precipitation hardening, and texture softening.

Hydrogen energy is a green and environmentally friendly energy source, as well as an excellent energy carrier. Hydrogen storage technology is a key factor in its commercial development. Solid hydrogen storage methods represented by using metal hydride (MH) materials have good application prospects, but there are still problems of higher heat transfer resistance and slower hydrogen absorption and release rate as the material is applied to reactors. This study innovatively proposed an array-type MH hydrogen storage reactor based on external water-cooled jacket heat exchange, aiming to improve the heat transfer efficiency and absorption reaction performance, and optimize the absorption kinetics encountered in practical applications of LaNi₅ hydrogen storage material in reactors. A mathematical model was built to compare the hydrogen absorption processes of the novel array-type and traditional reactors. The results showed that, with the same water-cooled jacket, the hydrogen absorption rate of the array-type reactor can be accelerated by 2.78 times compared to the traditional reactor. Because of the existence of heat transfer enhancement limits, the increase in the number of array elements and the flow rate of heat transfer fluid (HTF) has a limited impact on the absorption rate improvement of the array-type reactor. To break the limits, the hydrogen absorption pressure, as a direct driving force, can be increased. In addition, the increased pressure also increases the heat transfer temperature difference, thereby further improving heat transfer and absorption rate. For instance, at 3 MPa, the hydrogen absorption time can be shortened to 147 s.

In addition to cold drawing, the process of annealing is also essential in the preparation of Mg-4.7 wt%Gd (G4.7) alloy wires. The effect of annealing treatment on the recrystallized microstructure and texture of cold-drawn G4.7 wires was investigated. The results demonstrate that the uniformity and regularity of the recrystallized grains, as well as the annealing texture, impact the follow-up cold drawing performance. When the as-drawn G4.7 wires were annealed at 375 °C, the recrystallized grains were refined, accompanied by uniformity and regularity. Accordingly, the G4.7 wire had a good subsequent drawing deformability, with a maximum accumulative true strain (ATS) of 144%. Additionally, the evolution of the microstructure was consistent with the evolution of the texture. While annealing at a lower temperature (325 °C), the {0002} basal texture of the G4.7 wire was weak, forming the main texture component //DD (the drawing direction). With the increase in temperature, the basal texture was gradually strengthened and the texture component transformed from //DD to a recrystallized texture based on //DD. Even under high-temperature annealing, the G4.7 wire was still affected by the cold-drawn deformation texture and could not fully recover to the as-extruded texture, thus causing a decrease in the subsequent drawing performance.