The conventional range resolution improvement (RRI) technique combines two spectra of two received pulses with linear frequency modulation in the range-frequency domain. However, its application to frequency-modulation continuous-wave (FMCW) radar is not straightforward. This study proposes an RRI method for two FMCW radars using cross-track interferometry, which are placed at different positions along the cross-track axis. Through the combination of the deramped signals of the two FMCW radars with the RRI, an improved high-resolution range profile was obtained. Furthermore, the simulation and experimental results validated the effectiveness of the proposed method.
29 September 2022 in IEEE Transactions on Aerospace and Electronic Systems
When the inverse synthetic aperture radar (ISAR) system have sparse aperture (SA) dataset, which are non-uniform and less than Nyquist sampling rate along the cross-range axis, it can significantly blur the ISAR image of target having complex motion. To overcome this, we propose an improved ISAR imaging method based on dictionary estimation using parametric signal reconstruction (DEPSR) using accelerated meta-heuristic optimization (MHO). The proposed method reconstructs a motion-compensated and full-aperture (FA) dataset from a sparse-aperture (SA) dataset using MHO, which can be accelerated by a graphics processing unit (GPU). After then, we can obtain the motion-compensated FA dataset and by using this, we can exploit the conventional range-Doppler (R-D) processing. Simulation and real-data-based ISAR imaging results validate the superiority of the proposed method in terms of image quality in comparison with conventional methods, such as simple R-D processing, basis pursuit denoising, and DEPSR. Particularly, the proposed method exhibits a significantly lower computational burden than that of the traditional DEPSR approach.
31 August 2023 in IEEE Transactions on Aerospace and Electronic Systems
The specular-reflection bistatic synthetic aperture radar configuration (SBSC) has not been widely used because of two drawbacks: the ghost target phenomenon and ground range resolution degradation. Hence, to obtain a bistatic SAR (BISAR) image in the SBSC geometry, these two problems should be solved. The ghost target phenomenon can be overcome by setting an appropriate geometry for SBSC; however, overcoming ground range resolution degradation requires an additional solution. In this study, we propose a modified range resolution improvement (RRI) method to overcome the degradation of the ground range resolution of SBSC BISAR images. First, by setting an appropriate SBSC geometry, the ghost target phenomenon can be avoided by setting an appropriate SBSC geometry. Second, a modified range resolution improvement (RRI) method suited for SBSC is proposed to improve the ground range resolution of SBSC BISAR images. The drawbacks of the SBSC can be overcome using the proposed method. Various simulations, including electromagnetic analysis, were implemented to validate the effectiveness of the proposed method, and the results show that the proposed method generates a much improved ground range resolution compared to existing methods.
28 February 2022 in The Journal of Korean Institute of Electromagnetic Engineering and Science
Inverse synthetic aperture radar (ISAR) imaging is useful for classifying targets of interest. Therefore, it is critical to enhance Doppler resolution, which depends on the uncontrollable target’s motion. Traditional range-Doppler processing can generally compensate for translational motion (TM) and two-dimensional rotational motion (2D-RM) to focus ISAR images. However, it is nearly impossible to compensate for the three-dimensional rotational motion (3D-RM) of highly maneuvering targets. To solve this problem, frame selection approaches have been devised to retain frames with 2D-RM only, while discarding frames with 3D-RM. However, conventional frame selection methods usually have limited Doppler resolution against highly maneuvering targets, because each selected time frame with 2D-RM is often very short. This paper proposes an imaging framework to overcome the aforementioned 3D-RM problems, by exploiting frame selection and sparse-aperture (SA)-ISAR imaging simultaneously. The proposed approach first identifies time frames with dominant 2D-RM. Notably, time frames with 2D-RM consist of non-uniform samples along the slow time. This problem poses challenges for adopting conventional RM compensation methods. The proposed framework compensates for the nonlinear 2D-RM on non-uniform grid by employing dictionary estimation using the parametric signal reconstruction (DEPSR). Experimental results for both the simulated and real measurement datasets demonstrate the effectiveness of the proposed framework.