To suppress the Secondary Electron Yield (SEY) of Al2O3 ceramic surfaces for accelerator ceramic windows, a synergistic strategy integrating TiN film deposition and laser surface texturing was developed. TiN films were first deposited on Al2O3 substrates by pulsed DC magnetron sputtering, and the sputtering power was optimized through systematic characterization of the film morphology and chemical states, with 300 W identified as the optimal deposition condition. Laser surface texturing was then introduced to construct micro-structured Al2O3 surfaces with different geometrical features. Among the investigated laser powers, the 12 W-treated surface exhibited the most developed surface morphology and the highest roughness, indicating the most favorable topography for electron trapping. SEY measurements showed that the maximum SEY decreased from 8.2 for the as-received Al2O3 to 5.5 after deposition of a 10 nm TiN film, and was further reduced to 2.1, 1.0, and 1.7 for the textured TiN/Al2O3 surfaces prepared at 6, 12, and 18 W, respectively, with the best suppression for the 12 W textured TiN/Al2O3. The enhanced performance is attributed to the synergistic effect of low-SEY TiN surface chemistry and geometrical electron trapping induced by laser texturing. This work provides an effective route for constructing low-SEY Al2O3 ceramic surfaces for beam-window-related applications.
Compact high-energy electron linacs for industrial non-destructive testing and computed tomography require sub-millimetre focal spots to achieve high spatial resolution. In the present 12 MeV system, the chromatic sensitivity of the downstream quadrupole triplet motivates a stringent exit-energy-spread target. We present an acceptance-guided longitudinal phase-space-shaping strategy for a thermionic S-band standing-wave linac. Output-conditioned back-mapping reconstructs a V-shaped longitudinal response at the entrance of the nineteen-cell β = 1 section, which is used as a physics-based matching reference for the bunching-section design. The selected axisymmetric design produces a 12.4 MeV beam with a capture efficiency of 39.1% and establishes the non-uniform target axial-field profile for the three-dimensional RF structure. PARMELA tracking using the CST electromagnetic field representation and independent CST particle-in-cell (PIC) calculations of the same complete three-dimensional structure predict dominant-peak relative FWHM energy spreads of approximately 0.48%, within the adopted 0.5% beam-quality target. Independent commissioning measurements give horizontal and vertical optical transition radiation (OTR) focal-spot FWHM values of 0.26 mm and 0.36 mm, respectively.