In this study, micro and macro characterization of commercial brake pad by SEM, EDX, XRD and FTIR tests and determination of braking performance according to SAE J661 Test Procedure were aimed. The microstructure and spectrographic properties of the pad were compared with wear, density, surface roughness and hardness tests. In the study, it was determined that fibers, iron powders, oxides, vermiculite, graphite, barite and resin were homogeneously distributed in the microstructure and confirmed by the presence of :29 elements by EDX analysis. X-ray diffraction analysis revealed different morphologies and crystal forms in the test sample. The interaction of organic and inorganic compounds and functional groups of different elements were studied by FTIR analysis. In braking tests, the highest hot and cold coefficients of friction were 0.48 and 0.58, respectively, and the pad quality was determined as class G.
31 December 2021 in International Journal of Automotive Science And Technology
In this study, specific fuel consumption was determined at different axle load, tire pressure and drawbar force for a 60 HP tractor. In addition, the results were also estimated with the help of Artificial Neural Networks (ANN), which is one of the machine learning methods. The testings were carried out on the Tractor Draft Test Track. In the study; three different drive tire inner pressures (P) (160 kPa, 120 kPa and 80 kPa), four different dynamic axle loads (W) (1796 daN, 2076 daN, 2276 daN, 2476 daN) and four different traction forces (500 daN,1000 daN, 1500 daN, 2000 daN) were tested. Specific fuel consump-tion values varied between 290.7-542.1 g/kWh depending on the draft force in the testings Despite the 38% increase in the axle load, a 3.5% decrease occurred in the specific fuel consumption values. Specific fuel consumption values in-creased when increased tire inner pressure. Specific fuel consumption in-creased by 1.03% when a 100% increase in tire pressure. In ANN, the most suc-cessful model was determined by trying different training algorithms, transfer functions and the number of neurons in the hidden layer. In the most successful network model, MAE, RMSE values for the prediction of specific fuel consump-tion were found to be 0.005331, 0.007551 respectively.
The movement of moving devices or machines in terms of safety perspective must be controlled. In modern vehicle applications, braking is closely related to safety. Slowing or breaking the movements of vehicles safely is the task of braking mechanisms. The most important components of these mechanisms are the disc and brake lining pairs. Brake discs are made of lamella graphite cast iron. During the braking, the kinetic energy of the vehicle is converted into the heat energy through friction. The braking elements are subject to very heavy thermo mechanical conditions under heat, speed and load. The friction and wear properties of the brake disc must be thermally more stable against the heat energy generated on it in order to maintain stability. In this study, mechanical properties of the brake discs, which the disc surface was coated with flame spraying and melting, were improved. In addition, microstructure, abrasion, hardness and surface roughness tests of the brake disc were conducted. As a result, the coated disc showed superior mechanical properties compared to the original disc.
24 August 2022 in Environmental Science and Pollution Research
Bu çalışmada bir rüzgâr tüneli kullanılarak ölçeklendirilmiş tarımsal traktör modellerine etki eden hava akışı direnci deneysel olarak tespit edilmiştir. Traktör modelleri aynı şekle sahiptir fakat kullanıcının bulunduğu bölümde üç farklı tasarım denenmiştir. Bunlar kabinle kuşatılmış platform, güneşlikli platform ve devrilme sırasında kullanıcıyı koruyacak koruma çubuklu platformdur. Böylece kullanıcı bölümünün tasarımına bağlı olarak yol içi taşımacılıkta traktörlerin maruz kaldığı hava direnci değişimleri ilk defa deneysel olarak belirlenmiş olmaktadır. Geometrik benzerlik esaslarına göre rüzgâr tünelinde kullanılan traktör modelleri 1:13 oranında hazırlanmıştır. Rüzgâr tüneli testlerinde kinematik ve dinamik benzerlik sağlanamamakta fakat Reynolds sayısı bağımsızlığı elde edilebilmektedir. Rüzgâr tüneli hava akış hızı aralığında farklı hava hızlarında deneyler yapılarak bir Reynolds sayısı aralığı taranmıştır. Bu aralıkta modellere etki eden aerodinamik direnç kuvvetleri ve traktörlerin simetri ekseninde hava akışı kaynaklı basınç dağılımları ölçülmüştür. Elde edilen ölçümlerden boyutsuz aerodinamik direnç katsayısı ve basınç katsayısı değerleri hesaplanmıştır. Hesaplamalara göre kabin kullanımı aerodinamik direnci %3-15 aralığında arttırmaktadır. Düşük hızlarda kabin kullanımı kaynaklı direnç artış yüzdesi fazlayken yüksek hızlarda azalmaktadır. Kabin kullanımı sonucunda akışa dik traktör ön izdüşüm alanı artmaktadır. Fakat aerodinamik dirençteki artış ön iz düşüm alanındaki artışa göre bir mertebe daha düşüktür. Kabin kullanımının iş güvenliği açısından sağladıkları da düşünüldüğünde kabin kullanımı kaynaklı aerodinamik direnç artışının kabul edilebilir bir maliyet olduğu anlaşılmaktadır. Çalışma sonuçlarının tarımsal traktörlerle yol içi taşımacılıkta enerji tüketiminin ayrıştırılmasına katkı sağlaması beklenmektedir.
31 December 2025 in International Journal of Automotive Science And Technology
This study investigates the effect of exhaust gases emitted from a diesel engine operated on a workbench in the Motor Workshop of the Technical Sciences Vocational School at Karamanoğlu Mehmetbey University on the air quality of the workshop environment. The study also emphasizes the importance of using ventilation systems in such enclosed settings. In the experimental study, the concentrations of carbon monoxide (CO), carbon dioxide (CO₂), hydrocarbons (HC), nitrogen oxides (NOₓ) and benzene (C₆H₆) gases released into the workshop environment during engine operation were measured. The measurements were carried out in two different situations. In the first situation, an octopus-arm ventilation system was connected to the engine's exhaust manifold, while in the second situation, the ventilation system was not operated. The gas concentrations obtained in both situations were compared with the limit values specified in national and international occupational health and safety standards. The study found that when the ventilation system was operating, harmful gas levels remained below the limit values; however, when the ventilation was turned off, some gases, primarily CO and HC, exceeded the short-term exposure limits. These findings demonstrate that the use of effective ventilation systems in engine operation applications is critical for occupational health and safety