Ruslan Papirnyk

Dr. Ruslan Papirnyk

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

7 July 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NINabi Ibadov
Nabi Ibadov
OPOleksandr Volodymyr Pylypenko
Oleksandr Volodymyr Pylypenko
AZAnatoly Zelensky
Anatoly Zelensky
DKDIKAREV KOSTIANTYN
DIKAREV KOSTIANTYN
RPRuslan Papirnyk
Ruslan Papirnyk
ВСВадим Селецкий
Вадим Селецкий
Radiation monitoring at contaminated industrial sites is often restricted by safety, access, and operational constraints. Under such conditions, a modelling approach that can use a limited number of field measurements is useful for preliminary screening, route planning, and prioritization of verification surveys. This study presents a sparse spatiotemporal polynomial interpolation model for estimating the gamma radiation equivalent dose rate (EDR) along the perimeter of the Base-S radiation-hazardous industrial site. The model represents EDR as a function of spatial coordinates and time, and uses a reduced measurement structure consisting of four seasonal temporal nodes and five representative spatial nodes. The reduced structure is intended to support conservative preliminary assessment under the ALARA principle, not to replace field measurements. A 2021 case study is presented for 61 numbered perimeter points. The article presents one of the universal mathematical models developed by the authors to determine the impact of gamma radiation on the personnel of tailings facilities and industrial sites through the calculation of the equivalent dose rate during personnel residence stays, depending on time. The proposed polynomial interpolation model for rapid radiation dose assessment at radiation-hazardous industrial sites estimates equivalent dose-rate values for a specific planning case. The model represents the EDR field as a spatiotemporal polynomial f(x, y, t), where x and y are planar coordinates, and t is the day of the year. A conservative reduced scheme uses four seasonal maximum values and five representative spatial points to decrease the number of required field measurements and personnel residence time. For the 2021 case study, the model-estimated EDR at 61 numbered perimeter points ranged from 0.118 to 0.415 µSv/hour, with a mean of 0.242 µSv/hour. This model provides initial data for building a 2D model and, if necessary, a 3D model of radiation contamination within the research-object territory. The resulting 2D and 3D maps are interpreted as model-estimated visualization products. The proposed method, the model form of which is described as a cubic polynomial in t and a quadratic in x,y, allows for effective interpolation of complex multidimensional dependencies of observed data.

17 June 2025 in Ukrainian Journal of Civil Engineering and Architecture
Verified
Journal Article
Open access
PDF file
KDK.B. Dikarev
K.B. Dikarev
OMOlexandr Movchan
Olexandr Movchan
AKA.O. Kutsenko-Skokova
A.O. Kutsenko-Skokova
ASA.M. Sopilniak
A.M. Sopilniak
RPRuslan Papirnyk
Ruslan Papirnyk
Problem Statement. In order to restore Ukraine after the extensive destruction caused by armed aggression, it is necessary to explore methods of rapid and cost-effective construction. One promising solution is the use of permanent formwork, which simplifies the concreting process, improves energy efficiency, and shortens the time needed for erecting facilities. Purpose of the Article. To conduct a literature review of works devoted to the use of permanent formwork, focusing on modern technologies and materials. The goal is to assess the advantages and disadvantages of such systems, analyze their compatibility with locally sourced raw materials, and explore the possibility of involving lower-skilled workers in installation without compromising the quality of the structures. Conclusion. The paper examines the experience of using permanent formwork in Ukraine and abroad. Key development trends are considered: achieving energy efficiency through thermal insulation inserts, increasing load-bearing capacity with the help of composite materials, and employing plastics and glass fibers for corrosion protection and weight reduction. Two main types of permanent formwork are analyzed: the kind that is integrated into the structure’s load-bearing system (ferrocement, reinforced concrete, metal sheets, etc.) and the kind that does not contribute to the structure’s overall capacity but serves auxiliary functions (e.g., glass-fiber-reinforced concrete or polymer panels). It has been determined that there is currently a lack of research on using local Ukrainian building materials (such as sand, limestone, and metallurgical waste) that could help reduce formwork costs and logistical expenses. Global experience indicates the effectiveness of permanent formwork in residential and industrial construction, as well as the potential for its use in bridge-building and other complex structures requiring enhanced durability. This approach helps shorten construction times and reduce waste by eliminating the dismantling stage. In summary, permanent formwork is an effective tool for accelerated construction and restoration of damaged facilities. Further research should focus on developing systems that rely on domestic raw materials, optimizing block shapes and installation methods, and assessing the possibility of broader involvement of lower-skilled labor. This would help reduce building costs while maintaining the required quality and durability of the resulting structures.

22 November 2024 in Ukrainian Journal of Civil Engineering and Architecture
Verified
Journal Article
Open access
PDF file
RPRuslan Papirnyk
Ruslan Papirnyk
DKDIKAREV KOSTIANTYN
DIKAREV KOSTIANTYN
VSV.V. Seletskyi
V.V. Seletskyi
ВКВ. В. Коваль
В. В. Коваль
Problem statement. Being in a state of war since February 24, 2022, Ukraine is facing complex challenges and threats affecting various spheres of life, including the construction industry. Constant shelling and air strikes create dangerous conditions for construction workers and increase the risks to their lives and health. Carrying out construction and installation work in conditions of war requires the development of special strategies and technologies that will ensure the maximum level of safety of workers and continue construction projects in such difficult conditions. Purpose of the study. The purpose of the study is to ensure the safety of construction workers during construction and assembly works in Ukraine. Methods. Analytical studies of the level of security at construction sites under martial law conditions, analysis and synthesis of available data, comparison of the level of construction and installation works in Ukraine, systemic and legal research of legislation in the field of labor protection. Research results. The danger of aerial alarms and missile threats is so serious that it forces businesses to look for effective ways to protect their employees. An important prospect is the conversion of existing building structures such as elevator shafts, underground rooms and other parts of buildings into safe shelters. It will save the time and effort normally spent on evacuating workers, and will also reduce the risks to life and health of workers. Creating safe working conditions on construction sites requires a comprehensive approach and the implementation of innovative technologies. Mobile shelters, conversion of existing structures and implementation of contingency plans are key steps in this direction. Scientific novelty. Offered solutions for ensuring the safety of construction workers in the conditions of a military conflict have been developed and presented. Practical significance. The results of this research can be used to develop new approaches and technologies that will ensure the safety of workers and the efficiency of construction work in risk conditions.

29 July 2024 in Ukrainian Journal of Civil Engineering and Architecture
Verified
Journal Article
Open access
PDF file
ABA.M. Berezyuk
A.M. Berezyuk
MHM.I. Hannyk
M.I. Hannyk
RPRuslan Papirnyk
Ruslan Papirnyk
OMO.O. Martysh
O.O. Martysh
Problem statement. Technological process of metallurgical, pipe-rolling, chemical and other enterprises includes chemical treatment of metal products by pickling in hot (60–80 °C) sulphuric acid solutions with a concentration of 20–22 %. This treatment method is conducted in the pickling departments of enterprises in special containers (pickling units). Pickling solution of the specified concentration and temperature is a highly aggressive environment for all building structures made of traditional materials. Existing pickling units for chemical treatment of metal products do not ensure reliability and durability and are destroyed after 1-2 years of operation. Therefore, ferrous metallurgy enterprises that have pickling departments for chemical treatment of metal structures are classified as enterprises with a highly aggressive environment and their design should be developed with these conditions under consideration. The purpose of the work: Searching for and implementing mechanisms to improve the resistance of polymer concrete in aggressive environments in production. The object of research – is furan resins modified polymer concrete. The subject of the research – investigation of the particularities and improvement of constructive design for pickling baths made of materials based on polymer concrete in an aggressive environment and its implementation in production. Main part. Development of constructive design for technological pickling units made of structural corrosion-resistant material (furan resins modified polymer concrete). Conclusions. Pickling of metal products at ferrous metallurgy enterprises is conducted in highly aggressive hot sulphuric acid solutions of 20–25 % concentration at a temperature of 60–80 °C. Under the conditions of constant exposure to highly aggressive hot sulphuric acid solutions, even protection with chemically resistant materials does not ensure the required reliability and durability. To manufacture such structures, a new structural material is needed that combines chemical resistance with strength and durability. This material is a structurally chemical-resistant polymer concrete based on thermoset furan resins, which have high strength and universal chemical resistance, allowing us to solve the problem of reliability and durability of technological units for chemical treatment of metal structures at ferrous and non-ferrous metallurgy enterprises in a fundamentally new way. New constructive design for pickling units made of reinforced polymer concrete was developed in conjunction with shock-absorbing bars and an improved ventilation system, consisting of individual elements of full factory readiness weighing no more than 5 tonnes, which allows them to be transported and installed in operating pickling workshops using existing mechanisms.

17 June 2025 in Ukrainian Journal of Civil Engineering and Architecture
Verified
Journal Article
Open access
PDF file
DKDIKAREV KOSTIANTYN
DIKAREV KOSTIANTYN
RPRuslan Papirnyk
Ruslan Papirnyk
KKKoval Koval
Koval Koval
ВКВ. В. Коваль
В. В. Коваль
TTT.V. Tkach
T.V. Tkach
Problem statement. State policy plays a crucial role in stimulating the development of the construction industry in Ukraine under wartime conditions. During this critical period, a series of measures aimed at restoring infrastructure, providing housing for internally displaced persons, and supporting economic stability must be taken. The relevance of the topic is determined not only by the needs for recovery but also by the necessity to adapt to new business conditions and attract investments. The main directions of state policy include investment support, creating favorable conditions for investors through reducing the tax burden and simplifying construction permit procedures, financing construction projects, incorporating infrastructure restoration expenditures into the state budget, and attracting international financial institutions for financing housing and social projects. Additionally, it is essential to ensure social protection for the population through support programs, including housing subsidies and preferential loans for construction. The introduction of new ecological norms in construction, which ensure energy efficiency and safety, is also necessary in the context of contemporary ecological challenges. The purpose of the article is to analyze the role of state policy in stimulating the development of the construction industry in Ukraine during the war and to identify effective measures for restoring infrastructure and meeting the social needs of the population. Conclusion. State policy is a key factor determining the development of the construction industry in Ukraine during the war. The implementation of comprehensive measures aimed at restoring infrastructure, supporting investment, and providing social protection for the population will form the basis for stabilizing the economy and meeting the needs of internally displaced persons. Adaptation to new business conditions and the introduction of ecological norms will ensure the resilience of the construction sector in the future.