The scope of this article is to develop composite membranes using chitosan (CS) and graphene oxide (GO) as adsorbents for the removal of inorganic pollutants such as heavy metal ions, particularly Pb2+, from aqueous solutions. GO was obtained by modified Hummers method and blended with CS solution. The introduction of ethylenediaminetetraacetic acid (EDTA) compound to CS/GO suspension lead to an increased adsorption capacity of CS/GO for the elimination of heavy metals by forming stable chelates with them. The synthesized membranes were examined by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), and the adsorption behaviour of Pb2+ from aqueous solutions using CS/EDTA/GO membranes was evaluated using inductively coupled plasma mass spectrometry (ICP-MS). The adsorption performance of Pb2+ ions was studied by monitoring the concentration of Pb2+ against the adsorption period at an initial content of the adsorbent. The maximum adsorption efficiency of Pb2+ metal ions reached 767 mg·g−1 for CS/EDTA/GO 0.1%, 889 mg·g−1 for CS/EDTA/GO 0.3%, 970 mg·g−1 for CS/EDTA, 853 mg·g−1 for CS and 1526 mg·g−1 for GO. These findings show promising potential for CS/EDTA/GO membranes as effective adsorbent materials for the removal of heavy metal ions in water.
This study explores the potential utilization of bioactive glasses using different dopant ions and ketoprofen for both tissue ingrowth and local drug delivery. Four different compositions of vitreous powders were synthesized by the sol–gel combined with the emulsion method, in the presence of the ionic surfactant cetyltrimethylammonium bromide (CTAB), differing by dopant ions: SiO2- P2O5-CaO-(ZnO-MgO). This study investigates the chemical–mineralogical, morphological, and structural characteristics, as well as the biological properties of vitreous materials obtained. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) data analysis confirmed the vitreous nature; scanning electron microscopy (SEM) micrographs correlate with the results of physical absorption with N2, and the compositions used for the synthesis of the powders all showed for the samples with MgO lower porosity. Biological testing demonstrated biocompatible behavior towards osteoblast cells, (MG-63 type), inducing a slight acceleration of the mineralization phenomenon in the osteoid of the cells compared to the negative control, with cell viability for all the samples higher than 50%. Preliminary release analyses performed by UV–Visible spectroscopy showed a characteristic controlled release profile with prospects for a potential drug delivery system. The zinc–magnesium co-doped sample exhibits optimal performance in both osteogenic promotion and drug delivery, presenting potential for integrated bone repair and local drug administration. This study concludes that the synthesized bioglass exhibits promising characteristics for potential applications in tissue engineering with local drug delivery.