The parameters estimation and simulation studies of two classical discrete Binomial and Bernoulli q-distributions are described. For the parameters estimation problem, two major methods are used and presented. The iterative EM-Newton–Raphson method based on maximum likelihood and Bayes Theorem which is formulated to estimate the parameter p of the Bernoulli q-distribution. The moments method is used for the estimation of the probability of success denoted for the Binomial q-distribution. The effectiveness and feasibility of the proposed models are also demonstrated through simulation studies for different q parameters values and samples sizes.
End milling productivity is reduced by regenerative chatter. In this paper, a hybrid Fractional-Order PID with Active Disturbance Rejection Control (ADRC-FOPID) is proposed to suppress chatter in half-immersion milling. A Timoshenko cantilever flexible workpiece is modeled together with a delay-dependent regenerative cutting-force model. The lumped disturbance is canceled on-line by an Extended State Observer, and the five FOPID gains are tuned off-line using Particle Swarm Optimization with a ±27 N actuator-saturation constraint. The RMS tip displacement is reduced by 68.5% by the ADRC-FOPID controller. Moreover, it increases the minimum and maximum stable depth of cut from 1.00 mm to 2.67 mm and from 23.17 mm to 37.67 mm, respectively. A robustness analysis over plant uncertainties and the operating window, with 38 points, results in a low mean RMS of 4.2 µm. Compared with classical controllers and robust controllers such as PID, LQR, H∞, and μ-synthesis, ADRC-FOPID achieves the highest critical limiting depth (7.58 mm) and peak stable depth (49.52 mm) on the same benchmark. Thus, the proposed strategy is an effective, robust candidate strategy for chatter suppression in milling.
Accurate battery state-of-health (SOH) estimation is essential for safe and reliable electric-vehicle operation. This paper presents a Tempered Fractional Deterministic Learning (TF-DL) framework that combines deterministic learning with a tempered fractional adaptation law to introduce tunable memory and graceful forgetting into SOH estimation. Two realizations are considered: an exact truncated variant (TF-DL-T) and an embedded low-memory variant (TF-DL-E). The framework is evaluated on a NASA-derived cycle-level battery aging benchmark with capacity-based SOH labels and a battery-level train/test split. After filtering, 14 batteries were retained, of which 9 were used for training and 5 unseen batteries were used for testing. Random Forest achieved the best overall performance (MAE = 0.0436, RMSE = 0.0496), while LSTM was the strongest sequence baseline (MAE = 0.0757, RMSE = 0.0920). Among the online RBF-based methods, TF-DL-E achieved the best performance (MAE = 0.0966, RMSE = 0.1077), outperforming GD-DL and TF-DL-T. Unlike offline methods, TF-DL-E operates online with constant memory, which makes it suitable for embedded battery management systems. The results indicate that TF-DL-E is the more robust and practically relevant tempered variant, whereas TF-DL-T remains more fragile and parameter-sensitive.