Dimethyl ether to gasoline (DTG) process is an important way to obtain transportation fuels from non-petroleum routes due to the ever-decreasing fossil energy under “dual-carbon” background, and the development of catalyst with long lifetime remains an important challenge. Herein, the hierarchical nanocrystalline H[Fe,Al]ZSM-5 zeolites composed of loosely aggregated nanocrystals were prepared by adding a mesoporous template and prolonging the aging time, and their physicochemical properties and reactivity over the DTG reaction were investigated and compared with that of conventional H[Fe,Al]ZSM-5. The size of individual nanocrystals became smaller and more uniform, and the nanocrystals were loosely aggregated with abundant intercrystal mesopores, resulting in the significant enhancement of catalyst lifetime. Furthermore, the acid intensity of hierarchical nanocrystalline zeolites weakened, and the strong acid amount was reduced. DTG reaction results illustrated that the hierarchical nanocrystalline zeolite of Mes-ZSM-5 using a mesoporous template exhibited the longest lifetime (182 h) with 100% DME conversion, and gasoline yield remained more than 70%. Moreover, the C5+ selectivity was up to 76.6%; meanwhile, the contents of aromatics, benzene and durene were as low as 40%, 0.6% and 1.7%, respectively. The obtained gasoline product had a higher RON (research octane numbers).
The rational design of oxygen carriers (OCs) is critical for enhancing biomass chemical looping gasification (BCLG) performance. This work systematically investigated the effects of different supports (Al2O3, ZrO2, TiO2, SiO2) on the performance of NiFe-based OCs with oxidation and catalytic reforming functions. The gasification reactivity and support-active phase interaction of OCs in both oxidized and reduced states were evaluated. XRD, H2-TPR, XPS, and SEM techniques were employed to characterize the phase composition, synergistic interactions, and surface morphology. The results showed that NiFeAl exhibited the optimal gasification performance in both oxidized and reduced states, achieving a syngas (H2 + CO) yield of approximately 1.4 m3/kg (dry walnut shell). NiFeAl featured a higher Fe binding energy, abundant cavity structures, and the uniform dispersion of Ni and Fe on Al2O3, which confirm the formation of an appropriately strong Ni-Fe-Al ternary system. In contrast, NiFeZr suffered from the higher CO2 yield, attributed to the over-oxidation caused by the weak interactions. NiFeTi and NiFeSi had lower syngas yields due to their poor reducibility induced by excessively strong interactions. This work verifies that moderate support-active phase interactions in OCs are optimal for BCLG.
The identification of key active sites that determine oligomerization degree is a key focus of research in olefin oligomerization. The Ni/S-HZSM-5 catalyst has attracted widespread attention due to its excellent performance in this reaction. However, the interaction between SO42− and Ni2+ on the ZSM-5 support, especially quantitatively regulating their ratio, has been rarely investigated. In this study, we prepared a series of Ni/S-HZSM-5-x catalysts by fixing the Ni loading and varying the Ni/S molar ratio in the initial feedstock. Then, the obtained catalysts were characterized to systematically investigate how the Ni/S ratio affects their structure, properties, and n-butene oligomerization performance. The results indicate that tuning the Ni/S ratio enables the targeted regulation of surface acidity and electronic properties of the catalysts. The Ni/S ratio influenced the interaction between the Ni cation and SO42−-SO32− complex, which in turn altered the Lewis acidity of the catalysts. Further evaluation results reveal that n-butene conversion is positively correlated with the catalyst’s acidity, and the Ni2+/Ni+ ratio is positively correlated with the carbon chain length of the products. The surface form of NiSO4 is the primary factor determining Lewis acidity, which is directly associated with the chain-growth ability of the catalyst.
Nanocrystalline ZSM-5 zeolites modified by Fe, Zn, and Ga were synthesized. FeZSM-5 exhibited the outstanding catalytic performance in the MTG reaction at suitable reaction temperatures and WHSV of 370–390 °C and 2–4 h −1 , respectively.