The launch bar is a unique device of carrier-based aircraft, which is connected to the nose gear and shuttle. In order to avoid the launch bar striking the flight deck after the launch bar pops out of the shuttle, it is very important to research the dynamics performance of the launch bar. This paper establishes a staged mathematical model of catapult launch including the launch bar, a steam-powered catapult, a holdback bar, and a carrier-based aircraft. This article studied the effect of the mass of the launch bar, restoring moment of the launch bar, and center of gravity position of the launch bar on the dynamics performance of the launch bar. The results showed the following: (1) we could reduce the risk collision of the launch bar and deck by reducing the mass of the launch bar, increasing the restoring moment, and shifting the center of gravity position of the launch bar; (2) under the working condition of this article, we changed the center of gravity position of the launch bar to control the sink of the launch bar end, having the most obvious effect, and we reduced the mass of the launch bar, having the least effect on controlling the sink of the launch bar end; however, reducing the mass of the launch bar could also greatly reduce the risk collision of the launch bar and deck; (3) in order to avoid the launch bar striking the flight deck, the restoring moment of the launch bar must overcome the sum of other moments. The study results can give a theoretical reference for designing and testing the launch bars of carrier-based aircraft. It can also give a theoretical reference for designing and testing the launch bar’s driving mechanisms.
Selecting the optimal parameters for wet steam accumulator of steam-powered catapult is an important task, due to launching safety. There is no literature on the topic of the parameters optimization for wet steam accumulator of steam-powered catapult. The genetic algorithm (GA) was used to determine the optimal wet steam accumulator in this article. The sink-off-the-bow (SOB), angle of attack and rate of climb were used to create the objective function. The multi-objective optimization can be converted to single-objective optimization, which is subject to angle of attack and rate of climb. Moreover, the simulation model of the steam catapult system was built by creating a thermodynamics model of steam-powered catapult, a mathematical model of traction release device, a statics model of tensioning, a statics model of full takeoff power, a mathematical model of catapult force build-up with holdback, a model of release, a dynamics model of power stroke, a dynamics model of free deck run and a dynamics model of fly away. Finally, the optimal combination of the wet steam accumulator was obtained via numerical simulation. The GA method can effectively find the optimal parameters of wet steam accumulator, and its optimized parameters can increase the safety of catapult launch process.
Quadrotor UAV is vulnerable to external interference, which affects search and rescue. In this paper, a fuzzy neural network dynamic inverse controller (FNN-DIC) is designed to eliminate the instability of the attitude angle caused by atmospheric turbulence. Considering the complexity of atmospheric turbulence, the component model of atmospheric turbulence is obtained firstly based on the Dryden model, using Gaussian white noise as a random input signal and a designed shaping filter. Combined with the Newton-Euler equation, a nonlinear dynamic model for the quadrotor UAV with atmospheric disturbance is established. While the traditional nonlinear dynamic inverse cancels the nonlinearity of the controlled object, it relies on precise mathematical models. The fuzzy neural network can adaptively compensate for the inaccurate part of the model and the inverse error of the model caused by the external disturbance, and the stability of the control system is strictly proved by using the Lyapunov function. The experiments are carried out on the simulation platform, and the results show that the FNN method can ensure that the quadrotor UAV can still fly smoothly against strong disturbances, and that robustness of the system is significantly improved.
Visual homing is an attractive autonomous mobile robot navigation technique, which only uses vision sensors to guide the robot to the specified target location. Landmark is the only input form of the visual homing approaches, which is usually represented by scale-invariant features. However, the landmark distribution has a great impact on the homing performance of the robot, as irregularly distributed landmarks will significantly reduce the navigation precision. In this paper, we propose three strategies to solve this problem. We use scale-invariant feature transform (SIFT) features as natural landmarks, and the proposed strategies can optimize the landmark distribution without over-eliminating landmarks or increasing calculation amount. Experiments on both panoramic image databases and a real mobile robot have verified the effectiveness and feasibility of the proposed strategies.