A test platform with a millimeter-wave radar sensor, lane-line sensor, gyroscope, and controller area network was established to improve safety in using adaptive cruise control systems in vehicles. The motion-state characterization data of the host vehicle and surrounding vehicles in a real traffic environment were captured. The prediction method for the lane-changing maneuver of the vehicle ahead was developed using a hidden Markov model based on the distance between the host vehicle and the front vehicle, as well as the lateral and longitudinal velocities of the vehicle in front. The adaptive cruise control system control algorithm for assessing the target vehicle was optimized. The model was tested, and its predictions were compared with measured data. Result shows that the lane-changing and lane-keeping behaviors of the vehicle ahead can be predicted efficiently and accurately by the model. The maximum prediction accuracy rate for straight roads was 97% with the time window length of 4.5 s, whereas that for curved roads was 96% with the time window length of 3.5 s.

Comfort is a significant factor that affects passengers’ choice of autonomous vehicles. The comfort of an autonomous vehicle is largely determined by its control algorithm. Therefore, if the comfort of passengers can be predicted based on factors that affect comfort and the control algorithm can be adjusted, it can be beneficial to improve the comfort of autonomous vehicles. In view of this, in the present study, a human-driven experiment was carried out to simulate the typical driving state of a future autonomous vehicle. In the experiment, vehicle motion parameters and the comfort evaluation results of passengers with different physiological characteristics were collected. A single-factor analysis method and binary logistic regression analysis model were used to determine the factors that affect the evaluation results of passenger comfort. A passenger comfort prediction model was established based on the bidirectional long short-term memory network model. The results demonstrate that the accuracy of the passenger comfort prediction model reached 84%, which can provide a theoretical basis for the adjustment of the control algorithm and path trajectory of autonomous vehicles.

Determining an appropriate time to execute a lane change is a critical issue for the development of Autonomous Vehicles (AVs).However, few studies have considered the rear and the front vehicle-driver’s risk perception while developing a human-like lane-change decision model. This paper aims to develop a lane-change decision model for AVs and to identify a two level threshold that conforms to a driver’s perception of the ability to safely change lanes with a rear vehicle approaching fast. Based on the signal detection theory and extreme moment trials on a real highway, two thresholds of safe lane change were determined with consideration of risk perception of the rear and the subject vehicle drivers, respectively. The rear vehicle’s Minimum Safe Deceleration (MSD) during the lane change maneuver of the subject vehicle was selected as the lane change safety indicator, and was calculated using the proposed human-like lane-change decision model. The results showed that, compared with the driver in the front extreme moment trial, the driver in the rear extreme moment trial is more conservative during the lane change process. To meet the safety expectations of the subject and rear vehicle drivers, the primary and secondary safe thresholds were determined to be 0.85 m/s² and 1.76 m/s², respectively. The decision model can help make AVs safer and more polite during lane changes, as it not only improves acceptance of the intelligent driving system, but also further ensures the rear vehicle’s driver’s safety.

Accurate identification of pedestrian crossing intention is of great significance to the safe and efficient driving of future fully automated vehicles in the city. This paper focuses on pedestrian intention recognition on the basis of pedestrian detection and tracking. A large number of natural crossing sequence data of pedestrians and vehicles are first collected by a laser scanner and HD camera, then 1980 effective crossing samples of pedestrians are selected. Influencing parameter sets of pedestrian crossing intention are then obtained through statistical analysis. Finally, long short-term memory network with attention mechanism (AT-LSTM) model is proposed. Compared with the support vector machine (SVM) model, results show that when the pedestrian crossing intention is recognized 0 s prior to crossing, the recognition accuracy of the AT-LSTM model for pedestrian crossing intention is 96.15%, which is 6.07% higher than that of SVM model; when the pedestrian crossing intention is recognized 0.6 s prior, the recognition accuracy of AT-LSTM model is 90.68%, which is 4.85% higher than that of the SVM model. The determination of pedestrian crossing intention parameter set and the more accurate recognition of pedestrian intention provided in this work provide a foundation for future fully automated driving vehicles.