Hydrogel electrolytes are crucial for solving the problems of random zinc dendrite growth, hydrogen evolution reactions, and uncontrollable passivation. However, their complex fabrication processes pose challenges to achieving large-scale production with excellent mechanical properties required to withstand multiple cycles of mechanical loads while maintaining high electrochemical performance needed for the new-generation flexible zinc-ion batteries. Herein, we present a superspreading-based strategy to produce robust hydrogel electrolytes consisting of polyvinyl alcohol, sodium alginate and sodium acetate. The hydrogel electrolytes have a tensile strength of 54.1 ± 2.5 MPa, a fracture strain of up to 1113 ± 37%, and a fracture toughness of 374.1 ± 6.1 MJ m−3, showcasing endurance of 2500 cycles at 80% strain without damage. Besides, the hydrogel electrolytes feature a high ionic conductivity of 14 mS cm−1 and a Zn2+ transference number of 0.62, as interfacial regulation enables the symmetric cell to achieve 1300 hours of highly stable and reversible zinc plating/stripping. As a preliminary attempt toward mass production, soft-pack batteries assembled using modified hydrogel electrolytes demonstrate robust machinability, with minimal voltage change after being bent and deformed 100 times. This work is expected to pave the way for developing a convenient hydrogel electrolyte for effective and stable zinc-ion batteries.
One-dimensional (1D) aramid nanofiber (ANF) based nanocomposite films have drawn increasing attentions in various applications due to their excellent mechanical properties and impressive chemical and thermal stabilities. However, the large-area fabrication of aramid nanocomposite films with ultrastrong mechanical properties under mild conditions remains a great challenge. Here we present a facile superspreading-assisted strategy to produce aramid nanofiber based oriented layered nanocomposites using phase inversion process that occurs at the fully swollen hydrogel surfaces. The nanocomposite films based on ANF, carboxylation carbon tube (CNT–COOH), poly(vinyl alcohol) (PVA), and MXene nanosheet exhibit a tensile strength of up to 870.8 ± 85 MPa, a Young’s modulus of 21.8 ± 2.2 GPa, and outstanding toughness (up to 43.2 ± 4.6 MJ/m3), which are much better than those conventional aramid nanofiber based materials. Electrical conductivity of our nanocomposite films reaches the maximum of about 1100 S/m. The fabulous mechanical properties combination and continuous production capability render our strategy representing a promising direction for the development of high-performance nanocomposites.
High strength/toughness nanocomposites are increasingly in demand due to the development needs of high-end applications. However, the aggregation and random orientation of nanofillers and the weak crosslinking of the polymer matrix lead to the degradation of the mechanical properties of nanocomposites. Here, we present a strategy to prepare chitosan-based nanocomposites with aligned nanosheets via the in situ photo-crosslinking of modified chitosan. The well-dispersed and highly aligned nanosheets, as well as the dense covalently crosslinked network between the modified chitosan chains, effectively improve the mechanical properties of the prepared nanocomposites. For example, the chitosan-based nanocomposite films exhibit a tensile strength of up to 340.6 ± 13.4 MPa, a Young's modulus of 8.2 ± 0.2 GPa and a toughness of 22.0 ± 2.5 MJ m−3, which are 4.2, 4.8 and 1.8 times higher, respectively, than those of pure chitosan films. Moreover, the thermal decomposition temperature of the chitosan-based nanocomposite films reaches 286.8 °C, which is 48.5 °C higher than that of pure chitosan films. We consider that our strategy, which constructs a crosslinked chitosan structure with aligned nanofillers, could lead to the development and application of the bio-based composites with excellent mechanical properties.
High‐strength fibers have attracted intensive attention owing to their promising applications in various fields. However, the continuous fabrication of polyelectrolyte fibers with ultra‐strong mechanical properties remains a great challenge. Herein, we present a scalable microgroove‐based continuous‐spinning strategy of polyelectrolyte nanocomposite fibers. The shear flow induced the unraveling and aligning of the irregularly coiled polymer chains, which allowed the polyelectrolyte chains to fully contact each other after coalescing and enhanced the interaction between them. Nanocomposite fibers were prepared by adding two‐dimensional nanofillers into the negatively charged reaction solution. The nanocomposite fibers with aligned polymers and nanosheets exhibit excellent mechanical properties, with a tensile strength of up to 1783.8 ± 47.1 MPa and a modulus as high as 183.5 ± 4.6 GPa. Quantitative analysis indicates that the shear flow induced orientation of polymer chains and the well aligned nanosheets, as well as the strong interactions of polymer matrix form a dense and ordered structure, all these results in the observed mechanical properties. Moreover, we believe that our strategy could be extended to a variety of other polyelectrolytes and lead to the development of high‐performance fibers.