In practical engineering applications, the multivariate signal contains more fault feature information than the single channel signal. How to realize synchronous extraction of fault features from the multivariate signal is of great significance in fault diagnosis of rotary machinery. Dynamic mode decomposition (DMD) has attracted much attention due to its excellent dynamic feature extraction ability. However, DMD lacks mode aliasing property when dealing with the multivariate signal, which may lead to the loss of critical fault feature information. Cater to this problem, this paper proposed a multivariate dynamic mode decomposition (MDMD) algorithm which is the multivariate extension of DMD. First, snapshot tensors are defined to convert multivariate signals to tensor format. Then, MDMD algorithm is proposed by introducing tensor operations into the original DMD algorithm, where a tensor low tubal rank component extraction framework is constructed to enable simultaneous extraction of bearing fault features from the multivariate signal, to enhance the robustness and effectiveness of the algorithm. Finally, both numerical simulations and experiments verify the proposed MDMD has higher fault diagnosis accuracy than other multivariate signal processing methods.
27 February 2024 in IEEE Transactions on Instrumentation and Measurement
Variational mode decomposition (VMD) gained popularity due to its excellent performance in rolling bearing fault diagnosis. To obtain accurate diagnosis results depend on proper parameter selection, an improved VMD is proposed to achieve adaptive optimal parameter selection. This algorithm is based on a variable bandwidth control parameter strategy and a center frequency adaptive convergence strategy. First, a variable-bandwidth strategy is constructed according to the frequency distribution difference of each component. Next, the convergence property of the signal is analyzed by a self-convergent strategy based on the variable bandwidth control parameters. Then, the optimal initial center frequencies are discriminated to generate the optimal parameters. Finally, the optimal parameters for the improved VMD are used to obtain the decomposed modes. The validity of the proposed method is demonstrated by one simulation research and two application case analyses of faulty bearings. The performance comparisons indicate that the proposed method provides more accurate, robust, and efficient results.
18 September 2023 in IEEE Transactions on Instrumentation and Measurement
Time-frequency analysis techniques offer valuable insights into the dynamic characteristics of non-stationary signals, making them suitable for diagnosing faults in rotating machinery operating under variable speed conditions. However, extracting meaningful features from time-frequency representations (TFRs) faces challenges due to energy spreading caused by complex modes and background noise. To address this issue, this paper introduces a novel technique called the Synchro-Reassigned Extracting Transform (SRET). The SRET uses instantaneous frequency and group delay operators to extract and reassign energy coefficients simultaneously in both the frequency and time directions, enhancing the sharpness of TFRs. Theoretical analysis reveals limitations of the synchroextracting transform (SET) when analyzing signals with both slowly and rapidly varying features, which the proposed SRET effectively overcomes. To optimize computational efficiency, the paper presents a discrete implementation algorithm for SRET. The effectiveness of SRET in analyzing time-varying signals and diagnosing bearing faults is demonstrated through simulations and two sets of bearing vibration data. Additionally, the application of SRET in processing vibration signals from a wind turbine gearbox highlights its potential for fault diagnosis in rotating machinery.
The nonstationary characteristics of time-varying signals can be characterized by time-frequency analysis (TFA) accurately, which has been widely used in fault diagnosis of rotating machinery. However, some practical signals contain complex multi-component modes and noise interference, which will pose challenges to traditional TFA methods. In this paper, a novel technique called generalized synchroextracting-based stepwise demodulation (GSET-SD) transform is proposed. GSET-SD introduces a strategy that combines synchroextracting (SET) with a stepwise demodulation procedure, thereby solving the problem of detecting and retrieving the amplitude- and frequency-modulated (AM-FM) components of a multi-component signal from the time-frequency representation (TFR), while allowing the signal to be reconstructed from the TFR. Further, to increase the estimation accuracy of the initial instantaneous frequency (IF) in processing the strong modulation signals, SET is extended to the second-order or higher-order domain, and the IF is accurately estimated by the higher-order polynomial method, which can obtain higher resolution TFR. The proposed approach has been applied to numerical simulations and application research. The experimental results verify the effectiveness and superiority of GSET-SD in processing strong modulation signals, and demonstrate its promise in the field of fault diagnosis of rotating machinery under time-varying speeds.
18 March 2024 in IEEE Transactions on Instrumentation and Measurement
Time–frequency (TF) analysis (TFA) is a valuable tool for capturing nonstationary features in time-varying signals. However, for strongly amplitude-modulated and frequency-modulated (AM–FM) signals, how to achieve accurate characterization of time-varying features and how to obtain highly concentrated TF representations (TFRs) are the primary focuses. To address these issues, a novel method called the self-iterated extracting wavelet transform (SIEWT) is proposed in this article. In the proposed method, an iterative precise and high-resolution method for calculating the instantaneous frequency (IF) of a signal is presented. The SIEWT is based on the synchrosqueezing wavelet transform (SWT) and constructs an iterative IF estimator. On this basis, a self-iterated procedure is designed by the Rényi entropy to obtain a more accurate frequency estimation operator, meanwhile reducing the computational cost. After that, the acquired IF estimate is inserted into the extraction operator to further minimize energy dispersion and generate TFR with high TF resolution. The SIEWT also retains the signal reconstruction ability, its accurate estimation of IF plays a critical role in achieving precise signal reconstruction. The effectiveness of the proposed method is thoroughly confirmed by simulation and analysis of real signals, with comparisons made against classical TF analysis methods.
18 July 2024 in Measurement Science and Technology
Structural health monitoring relies heavily on measurements. Entropy theory is emerging as a critical quantitative analysis technique for interpreting measured data for both health monitoring and fault identification of structural systems. This paper introduces the algorithms of weighted symbolic sequence entropy (WSSE) and its multi-weighted derivation, termed multi-weighted symbolic sequence entropy (MWSSE). WSSE optimizes the existing algorithms, including symbolic sequence entropy and improved symbolic sequence entropy, by introducing a weighting factor in the computation process of the algorithm. WSSE significantly contributes to enlarging the difference between normal and fault sequences of signals in rotary machinery. The multi-weighted derivation of WSSE, namely MWSSE, more effectively depicts the dynamical characteristics of rotary machinery by utilizing entropy values of multiple weighting factors as health indicators. The MWSSE-based degradation monitoring and fault identification approaches developed by the authors are validated through application research and comparative analysis. These novel entropy algorithms offer innovative quantitative analysis techniques for fault diagnosis in rotary machinery and structural health monitoring and hold potential for application in broader research fields.