Additive manufacturing has shown giant potential in advanced manufacturing industry. However, distortion of additive-manufactured parts may interrupt the printing process and decrease manufacturing precision, causing a significant waste of time and money. Distortion, a common problem in additive manufacturing, has not been sufficiently researched. In this study, we provide a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force. A quantitative model was established to illustrate inconsistent shrinkage during the additive process. A qualitative model was then built for showing the distortion caused by inconsistent shrinkage. It can be founded that inconsistent shrinkage accumulated during the additive process drives the final distortion of part. We concluded most influencing factors of distortion together, forming towards a comprehensive understanding of distortion in additive manufacturing. This study not only links micro melting-solidification process and macro structural mechanics in science, but also provides systematic solutions for decreasing the distortion in additive manufacturing for engineering.
10 February 2023 in The International Journal of Advanced Manufacturing Technology
A pulsed current is introduced into the traditional coaxial laser cladding process to decrease the porosity of the cladding layer. The magneto contraction force caused by pulsed current exerted on the molten pool squeezes the gas out and compensates the shrinkage during molten pool solidification. As a result the porosity of the cladding layer is decreased to an extremely low degree. Simultaneously, the grain of the cladding layer is finer with the added supercooling degree with pulsed current. The microhardness of an equiaxed zone in the cross section of a cladding layer also increases.