The stiffness of a plant cell in response to an applied force is determined not only by the elasticity of the cell wall but also by turgor pressure and cell geometry, which affect the tension of the cell wall. Although stiffness has been investigated using atomic force microscopy (AFM) and Young’s modulus of the cell wall has occasionally been estimated using the contact-stress theory (Hertz theory), the existence of tension has made the study of stiffness more complex. Elastic shell theory has been proposed as an alternative method; however, the estimation of elasticity remains ambiguous. Here, we used finite element method simulations to verify the formula of the elastic shell theory for onion (Allium cepa) cells. We applied the formula and simulations to successfully quantify the turgor pressure and elasticity of a cell in the plane direction using the cell curvature and apparent stiffness measured by AFM. We conclude that tension resulting from turgor pressure regulates cell stiffness, which can be modified by a slight adjustment of turgor pressure in the order of 0.1 MPa. This theoretical analysis reveals a path for understanding forces inherent in plant cells.

The femtosecond laser amplifier has attracted much attention as a promising tool for cell processing and manipulation. The focused pulse with high peak intensity induces not only 3D selective laser ablation, but effective generation of a shockwave and stresswaves. Under a microscope, these waves act on cells near the laser focal point as an impulsive force. This force has been applied as an external trigger to estimate intercellular adhesion strength, to manipulate single cells and to investigate the mechanobiology. In this review, we explain the kinetics of the impulsive force based on the femtosecond laser ablation mechanism, and introduce applications to the evaluation of intercellular adhesion, which is an essential issue in cell research for elucidating tissue formation and signal transduction between cells in the physiology and pathology. Based on these achievements, we predict future advanced applications to biology and engineering.

High-speed isolation of microparticles (e.g., microplastics, heavy metal particles, microbes, cells) from heterogeneous populations is the key element of high-throughput sorting instruments for chemical, biological, industrial and medical applications. Unfortunately, the performance of continuous microparticle isolation or so-called sorting is fundamentally limited by the trade-off between throughput, purity, and yield. For example, at a given throughput, high-purity sorting needs to sacrifice yield, or vice versa. This is due to Poisson statistics of events (i.e., microparticles, microparticle clusters, microparticle debris) in which the interval between successive events is stochastic and can be very short. Here we demonstrate an on-chip microparticle sorter with an ultrashort switching window in both time (10 μs) and space (10 μm) at a high flow speed of 1 m s⁻¹, thereby overcoming the Poisson trade-off. This is made possible by using femtosecond laser pulses that can produce highly localized transient cavitation bubbles in a microchannel to kick target microparticles from an acoustically focused, densely aligned, bumper-to-bumper stream of microparticles. Our method is important for rare-microparticle sorting applications where both high purity and high yield are required to avoid missing rare microparticles.

Hechtian strands are thread-like structures in plasmolyzed plant cells that connect the cell wall to the plasma membrane. Although these strands were first observed more than 100 years ago, their physiological roles are largely unknown. Here, we used intracellular laser microdissection to examine the effects of disrupting Hechtian strands on plasmolyzed tobacco BY-2 cells. When we focused femtosecond laser pulses on Hechtian strands, targeted disruptions were induced, but no visible changes in cell morphology were detected. However, the calcofluor white signals from β-glucans was detected in plasmolyzed cells with disrupted Hechtian strands, whereas no signals were detected in untreated plasmolyzed cells. These results suggest that Hechtian strands play roles in sensing cell wall integrity.

Engineered blood vessels generally recapitulate vascular function in vitro and can be utilized in drug discovery as a novel microphysiological system. Recently, various methods to fabricate vascular models in hydrogels have been reported to study the blood vessel functions in vitro; however, in general, it is difficult to fabricate hollow structures with a designed size and structure with a tens of micrometers scale for blood vessel tissue engineering. This study reports a method to fabricate the hollow structures in photodegradable hydrogels prepared in a microfluidic device. An infrared femtosecond pulsed laser, employed to induce photodegradation via multi-photon excitation, was scanned in the hydrogel in a program-controlled manner for fabricating the designed hollow structures. The photodegradable hydrogel was prepared by a crosslinking reaction between an azide-modified gelatin solution and a dibenzocyclooctyl-terminated photocleavable tetra-arm polyethylene glycol crosslinker solution. After assessing the composition of the photodegradable hydrogel in terms of swelling and cell adhesion, the hydrogel prepared in the microfluidic device was processed by laser scanning to fabricate linear and branched hollow structures present in it. We introduced a microsphere suspension into the fabricated structure in photodegradable hydrogels, and confirmed the fabrication of perfusable hollow structures of designed patterns via the multi-photon excitation process.