The aluminum electrolysis industry faces significant challenges due to the high consumption and environmental impact of carbon anodes, which are prone to oxidation in high-temperature and strongly oxidizing environments. This study innovatively introduces aluminum fluoride (AlF3) as an additive to enhance the oxidation resistance of carbon anodes for aluminum electrolysis. By systematically exploring microstructural evolution through SEM, XRD, Raman spectroscopy, and permeability analyses, it reveals that AlF3 inserts fluorine atoms into carbon interlayers, forming F-C bonds that reduce interlayer spacing while promoting graphitization. Simultaneously, AlF3-derived α-Al2O3 particles densify the anode and make it more compact, reaching the optimum when 7 wt.% AlF3 is doped. The bulk density of the carbon anode increased to 2.08 g/cm3, porosity decreased to 0.315, and air permeability reached a minimum of 2.3 nPm. In addition, the fluorine intercalation reduces the electrical resistance to 2.12 Ω via conductive F-C clusters. The demonstrated efficacy of AlF3 additives in enhancing the oxidation resistance and conductivity of carbon anodes suggests strong potential for industrial adoption, particularly in optimizing anode composition to reduce energy consumption.
In this study, niobium/zirconium dioxide/hydroxyapatite (Nb/ZrO2/HA) composite coating was deposited on ZK60 magnesium alloy by the plasma spraying technique. The effects of spraying power and the powder feeding rate on the surface morphology, corrosion resistance, surface hardness, and surface roughness were investigated in this study. Tests were conducted through the optimal parameter combination obtained during the optimization process. The Nb/ZrO2/HA coating consisted of α/β-TCP, TTCP, Nb2O5, HA, Nb, and t-ZrO2 phases. The results suggest that the Ca/P ratio of the coating approached the ideal calcium-to-phosphorus ratio characteristic of bone implant material surfaces. Under the parameters of 33 kw and 18 g/min, the coating exhibited a dense, flattened morphology with significantly reduced roughness of Ra = 2.128 μm. Compared to the pure HA coating, the surface hardness and corrosion resistance of the Nb/ZrO2/HA-coated sample increased by 28% and 56%, respectively. Furthermore, the mass loss rate in simulated body fluid (SBF) was considerably decreased by 33% compared to the HA coating. In vitro cytotoxicity assay reveals that the cell proliferation activity of the Nb/ZrO2/HA composite coating was higher than that of the HA/ZrO2 composite coating and the HA coating. Hence, the composite coating possessed favorable degradation controllability and biocompatibility.