Safety and security are among the major basic needs for the public in daily life and transportation plays a crucial role in satisfying this need. According to the World Health Organization (WHO) data, estimates of 1.2 million people worldwide died as a result of road traffic injuries in 2013 and it is estimated that road traffic injuries will be the 6th leading cause of death by 2030. Among the various types of road traffic injuries, accidents between trains and road vehicles are the deadliest and are associated with high cost of accidents. As Railway transportation continues to be an important piece to the overall national transportation puzzle in Ethiopia and as congestion continues to increase on the nation’s roadways, commuters continue to flock to public transit as an alternative transportation mode. In Addis Ababa Light Rail Transit, there are over 20 level crossings, this represent a significant safety hazard to both road and rail users. In this paper, we used safety demonstration by complete system analysis to carry out safety demonstration for level crossing at Addis Ababa Light Rail Transit, and Failure mode effect analysis was used for identifying the potential hazards associated with the system and their root causes. Hazards associated with Addis Ababa Light Rail Transit level crossing are identified and classified, and results showed that 41% of the hazards are caused by Human errors, technical problems has 32%, non-compliance with standard operating procedures takes 18% and 9% are caused by other factors. Our Failure mode effect analysis result shows that safe redesign of the level crossing, management and operation of level crossings can reduce risks, and frequent orientation of road vehicle users to always give attention to traffic signal in level crossing can reduce the number of fatal and serious incidents and collisions.
21 September 2019 in International Journal of Engineering Research & Technology
Prevention of Railway Accident using Arduino Based Safety System: A case Study of Addis Ababa Light Rail Transit - written by Adoh Lucky Ugochukwu , Akello Fiona Mercy , Nyangassa Faraja published on 2019/09/21 download full article with reference data and citations
Railway dynamic inspection generates large volumes of track-condition data, but translating repeated defect records into maintenance priorities remains challenging. This study presents a data-driven approach for railway track maintenance prioritisation using three repeated dynamic inspection campaigns. The dataset comprised 6,977 defect records distributed across 453 kilometre posts. Temporal variation, defect severity and type, track quality index, directional variation, spatial distribution, and inspection recurrence were evaluated. A composite priority index (CPI) was formulated by integrating weighted defect occurrence, recurrence across inspections, and defect diversity to rank affected locations according to relative maintenance priority. The results showed substantial variation between inspections, with 5,071 defects recorded in September compared with 1,111 and 795 in July and August, respectively. Of the 453 affected kilometre posts, 211 (46.6%) contained defects in all three inspections. The CPI identified KM 26 as the highest-priority location, followed by KM 268 and KM 54. The ranking differed from defect-frequency ranking, demonstrating that locations with the greatest defect counts were not necessarily those with the highest maintenance priority. The proposed approach provides an interpretable means of using repeated dynamic inspection data to identify locations requiring further inspection or maintenance attention.
15 September 2019 in International Journal of Technical Research & Science
The aim of this analysis was to model the pantograph - catenary system at static equilibrium and provide analytical solutions by computing the natural frequencies of the system, mode functions, equivalent stiffness of the catenary system and the deflections of the catenary wire as a function of position, time and tensioning force. Furthermore, dynamic analysis was conducted analytically and the results of the dynamic performance were obtained. It was shown that the dynamic response of the catenary system is dependent on the design parameters in which tensioning force is included. It was also shown that low tensioning forces result in high risk of contact loss and increased wave propagation in the catenary wire while high tensioning forces result in increased static stresses in the catenary system. The results in this article can be used to select optimum tensioning forces and design parameters for desired pantograph-catenary dynamic performance.