The aim of this study was to investigate the different combinations of red (R) and blue (B) light emitting diode (LEDs’) lighting effects on growth, pigment content, and antioxidant capacity in lettuce, spinach, kale, basil, and pepper in a growth chamber. The growth chamber was equipped with R and B light percentages based on total light intensity: 83% R + 17% B; 91% R + 9% B; 95% R + 5% B; and control was 100% R. The photosynthetic photon flux density (PPFD), photoperiod, temperature, and relative humidity of the growth chamber were maintained at 200 ± 5 μmol m⁻² s⁻¹, 16 h, 25/21 ± 2.5 °C, and 65 ± 5%, respectively. It is observed that the plant height of lettuce, kale, and pepper was significantly increased under 100% R light, whereas the plant height of spinach and basil did not show any significant difference. The total leaf number of basil and pepper was significantly increased under the treatment of 95% R + 5% B light, while no significant difference was observed for other plant species in the same treatment. Overall, the fresh and dry mass of the studied plants was increased under 91% R + 9% B and 95% R + 5% B light treatment. The significantly higher flower and fruit numbers of pepper were observed under the 95% R + 5% B treatment. The chlorophyll a, chlorophyll b, and total chlorophyll content of lettuce, spinach, basil, and pepper was significantly increased under the 91% R + 9% B treatment while the chlorophyll content of kale was increased under the 95% R + 5% B light treatment. The total carotenoid content of lettuce and spinach was higher in the 91% R + 9% B treatment whereas the carotenoid content of kale, basil, and pepper was increased under the 83% R + 17% B treatment. The antioxidant capacity of the lettuce, spinach, and kale was increased under the 83% R + 17% B treatment while basil and pepper were increased under the 91% R + 9% B treatment. This result indicates that the addition of B light is essential with R light to enhance growth, pigment content, and antioxidant capacity of the vegetable plant in a controlled environment. Moreover, the percentage of B with R light is plant species dependent.

Ophiorrhiza rugosa var. prostrata is one of the most frequently used ethnomedicinal plants by the indigenous communities of Bangladesh. This study was designed to investigate the antidiarrheal, anti-inflammatory, anthelmintic and antibacterial activities of the ethanol extract of O. rugosa leaves (EEOR). The leaves were extracted with ethanol and subjected to in vivo antidiarrheal screening using the castor oil-induced diarrhea, enteropooling, and gastrointestinal transit models. Anti-inflammatory efficacy was evaluated using the histamine-induced paw edema test. In parallel, in vitro anthelmintic and antibacterial activities were evaluated using the aquatic worm and disc diffusion assays respectively. In all three diarrheal models, EEOR (100, 200 and 400 mg/kg) showed obvious inhibition of diarrheal stool frequency, reduction of the volume and weight of the intestinal contents, and significant inhibition of intestinal motility. Also, EEOR manifested dose-dependent anti-inflammatory activity. Anthelmintic action was deemed significant (P < 0.001) with respect to the onset of paralysis and helminth death. EEOR also resulted in strong zones of inhibition when tested against both Gram-positive and Gram-negative bacteria. GC-MS analysis identified 30 compounds within EEOR, and of these, 13 compounds documented as bioactive showed good binding affinities to M3 muscarinic acetylcholine, 5-HT3, tubulin and GlcN-6-P synthase protein targets in molecular docking experiments. Additionally, ADME/T and PASS analyses revealed their drug-likeness, likely safety upon consumption and possible pharmacological activities. In conclusion, our findings scientifically support the ethnomedicinal use and value of this plant, which may provide a potential source for future development of medicines.

Plant production in urban areas is receiving much attention due to its potential role in feeding the rapidly growing population of city dwellers. However, higher energy demands in urban plant factories are among the key challenges that need to be addressed. Artificial lighting is responsible for the most significant levels of energy consumption in plant factories; therefore, lighting systems must be modulated in consideration of the sustainable food–energy nexus. In this context, low light irradiation using blue (B) and red (R) LED was applied in a plant factory for the growth of red leaf lettuce (Lactuca sativa L. var Lollo rosso) to evaluate the growth performance and functional quality. The tested B (450 nm) and R (660 nm) light ratios were B/R = 5:1; 3:1; 1:1; 1:3, and 1:5, with a photosynthetic photon flux density (PPFD) of 90 ± 3 µmol m⁻² s⁻¹. In the plant factory, the photoperiod, temperature, RH, and CO₂ conditions were 16 h d⁻¹, 20 ± 0.5 °C, 65% ± 5%, and 360 ± 10 μL L⁻¹, respectively. The lettuce was harvested 10 and 20 days after the commencement of LED light treatment (DAT). In this study, normal photosynthetic activity and good visual quality of the lettuce were observed. The results show that a higher fraction of R (B/R = 1:5) significantly increased plant growth parameters such as plant height, leaf area, specific leaf area, plant fresh and dry weight, and carbohydrate content. By contrast, a higher fraction of B (B/R = 5:1) significantly increased the photosynthetic parameters and contents of pigment and phenolic compounds. The rate of photosynthetic performance, carbohydrates (except starch), and content of phenolic compounds were highest after 10 DAT, whereas the pigment contents did not significantly differ at the different growth stages. It is concluded that high R fractions favor plant growth and carbohydrate content, while high B fractions favor photosynthetic performance and the accumulation of pigments and phenolic compounds in red leaf lettuce under limited lighting conditions. This study will help in designing artificial lighting conditions for plant factory production to reduce energy demands.

Broomcorn millet (Panicum miliaceum L.) is an important nutritious ancient minor-cereal food crop. However, this crop is little explored in the food processing arena to improve its functionality. In this context, different processing methods were applied to enhance the secondary compounds of broomcorn millet. Four different individual methods such as roasting, steaming, puffing, and extrusion were applied at 110 °C to enhance the functional attributes of millet flour. It was observed that the significantly highest content of total phenolic (TP) (670 mg/100 g of ferulic acid equivalent) and total flavonoid (TF) (391 mg/100 g of rutin equivalent ) was attained in the roasted whole millet followed by steaming (315 mg/100 g, 282 mg/100 g), puffing (645 mg/100 g, 304 mg/100 g), extrusion (455 mg/100 g, 219 mg/100 g), and control (295 mg/100 g, 183 mg/100 g). The chromatographic analysis showed a greater content of single phenolic acids such as syringic acid, gallic acid, 4-hydroxy benzoic acid, ferulic acid, sinapic acid, and catechin in roasted millet compared to control, and the content of each acid was higher in whole millet than dehulled. Results also indicated that the content of ferulic acid was relatively higher among the quantified single phenolic acid from broomcorn millet. Likewise, in comparison with dehulled millet, the roasted whole millet showed higher total antioxidant capacity, measured by the 2,2-diphenyl-1 picryl hydrazyl (DPPH), the ferric reducing antioxidant power assay (FRAP), the phosphomolybdenum method (PPMD), and the hydroxyl radical scavenging capacity (HRSC) method. Lastly, it is concluded that the roasting method should be taken into consideration in the processing of broomcorn millet to enhance the content of nutraceutical compounds and improve its functionality.

The effect of exogenously applied putrescine (Put) on salt stress tolerance was investigated in Panax ginseng. Thirty-day-old ginseng sprouts were grown in salinized nutrient solution (150 mM NaCl) for five days, while the control sprouts were grown in nutrients solution. Putrescine (0.3, 0.6, and 0.9 mM) was sprayed on the plants once at the onset of salinity treatment, whereas control plants were sprayed with water only. Ginseng seedlings tested under salinity exhibited reduced plant growth and biomass production, which was directly interlinked with reduced chlorophyll and chlorophyll fluorescence due to higher reactive oxygen species (hydrogen peroxide; H₂O₂) and lipid peroxidation (malondialdehyde; MDA) production. Application of Put enhanced accumulation of proline, total soluble carbohydrate, total soluble sugar and total soluble protein. At the same time, activities of antioxidant enzymes like superoxide dismutase, catalase, ascorbate peroxidase, guaiacol peroxidase in leaves, stems, and roots of ginseng seedlings were increased. Such modulation of physio-biochemical processes reduced the level of H₂O₂ and MDA, which indicates a successful adaptation of ginseng seedlings to salinity stress. Moreover, protopanaxadiol (PPD) ginsenosides enhanced by both salinity stress and exogenous Put treatment. On the other hand, protopanaxatriol (PPT) ginsenosides enhanced in roots and reduced in leaves and stems under salinity stress condition. In contrast, they enhanced by exogenous Put application in all parts of the plants for most cases, also evidenced by principal component analysis. Collectively, our findings provide an important prospect for the use of Put in modulating salinity tolerance and ginsenosides content in ginseng sprouts.

The effect of light emitting diode (LED) light and far infrared irradiation (FIR) on total phenol, isoflavones and antioxidant activity were investigated in soybean (Glycine max L.) sprout. Artificial blue (470 nm), green (530 nm) LED and florescent light (control) were applied on soybean sprout, from three to seven days after sowing (DAS) in growth chamber. The photosynthetic photon flux density (PPFD) and photoperiod was 150 ± 5 μmol m⁻²s⁻¹ and 16 h, respectively. The FIR was applied for 30, 60 and 120 min at 90, 110 and 130 °C on harvested sprout. Total phenolic content (TP) (59.81 mg/g), antioxidant capacity (AA: 75%, Ferric Reduction Antioxidant Power (FRAP): 1357 µM Fe²⁺) and total isoflavones content (TIC) (51.1 mg/g) were higher in blue LED compared to control (38.02 mg/g, 58%, 632 µM Fe²⁺ and 30.24 mg/g, respectively). On the other hand, TP (64.23 mg/g), AA (87%), FRAP (1568 µM Fe²⁺) and TIC (58.98 mg/g) were significantly increased by FIR at 110 °C for 120 min among the treatments. Result suggests that blue LED is the most suitable light to steady accumulation of secondary metabolites (SM) in growing soybean sprout. On the other hand, FIR at 110 °C for 120 min is the best ailment to induce SM in proceed soybean sprout.