To meet the increasing needs of fuels, especially non-fossil fuels, the production of “bio-oil” is proposed and many efforts have been undertaken to find effective ways to transform bio-wastes into valuable substances to obtain the fuels and simultaneously reduce carbon wastes, including CO2. This work is devoted to the gasification of sugar cane bagasse to produce CO in the process assisted by CO2. The metals were varied (Fe, Co, or Ni), along with their amounts, in order to find the optimal catalyst composition. The materials were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), and electron diffraction, and were tested in the process of CO2-assisted gasification. The catalysts based on Co and Ni demonstrate the best activity among the investigated systems: the conversion of CO2 reached 88% at ~800 °C (vs. 20% for the pure sugarcane bagasse). These samples contain metallic Co or Ni, while Fe is in oxide form.
The adsorption of H2S impurity in the gas flow on carbon adsorbents produced from coconut shells and sugarcane bagasse was studied. The runs were carried out in pulse mode. An original chromatographic method for determining the degree of H2S absorption on carbon adsorbents has been developed, which makes it possible to determine the amount of absorbed H2S in air and water environments. The results obtained show that the successive treatment of carbon adsorbents first with a solution of a strong oxidizer (HNO3, KMnO4) and then, after washing, with an alkali solution (KOH) leads to a sharp increase in the amount of H2S adsorbed. The efficiency of H2S absorption on the obtained adsorbent reaches 85.5%, which corresponds to 27.7 mg/g H2S and is comparable to the results obtained on commercial coconut carbon (CAU). The data allow one to conclude that the rise in the H2S adsorption on the carbon sorbents studied can be due to the increase in the micropores’ volume in the activated carbon, as well as the formation of surface functional groups containing an alkali metal (i.e., C-OK, C-COOK) that promotes irreversible chemisorption of H2S impurity on the carbon adsorbent. The absorption of H2S occurs through the chemisorption mechanism, which is confirmed by IR spectroscopy data.