Adriana-Mariana Asoltanei

Dr. Adriana-Mariana Asoltanei


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 June 2024 in Processes
Verified
Journal Article
Open access
PDF file
AAAdriana-Mariana Asoltanei
Adriana-Mariana Asoltanei
Eugenia Teodora Iacob-TudoseEugenia Teodora Iacob-Tudose
Eugenia Teodora Iacob-Tudose
MSMarius Sebastian Secula
Marius Sebastian Secula
IMIoan Mamaliga
Ioan Mamaliga
Diffusion processes in operations involving polymeric materials are of significant interest. Determining experimental values for diffusion coefficients is often challenging. Estimating these coefficients in concentrated polymer solution, polymer films, and membranes relies on experimental tests where the polymer is brought into contact with certain components/solvents. The diffusion coefficient values depend on the diffusion type, which is affected mainly by the nature of the polymer, concentration, and temperature. The literature presents an extensive amount of information regarding the diffusion phenomenon. This paper makes a particular contribution by showing how experimental data obtained from different applications can be processed to determine diffusion coefficients. The manuscript addresses some aspects regarding solvent diffusion in polymers, and illustrates how to determine the diffusion coefficients from experimental data. For specific cases of diffusion, several models for the predictive estimation of diffusion coefficients are also presented. Polymer–solvent systems such as polyvinyl alcohol (PVA)–water, cellulose acetate (CA)–tetrahydrofuran (THF) and cellulose triacetate (CTA)–dichloromethane (DCM) are investigated, with their diffusion mechanisms influenced by changes in structure caused by variations in concentration and temperature. The experimental data obtained through a gravitational technique allow for the highlighting of the diffusion mechanism and the selection of an appropriate mathematical model. A change in the structure of the polymer during the experiment leads to diffusion anomalies. Modeling the experimental data yielded diffusion coefficient values that vary based on the type of system investigated, composition and temperature. Thus, in the case of the CTA-DCM system, the diffusion coefficient at 303 K, at various concentration values, is in the range of 4.5 and 8·10−11 m2/s; for the PVA-H2O system, D = 4.1·10−12 m2/s at 303 K, and D = 6.5·10−12 m2/s at 333 K; while for the CA-THF system, the solvent–polymer diffusion coefficient has a value of 2.5∙10−12 m2/s at 303 K, and D = 1.75∙10−11 m2/s at 323 K. Mathematical models can be useful in studies regarding the drying of polymer films with complex structures, providing knowledge for designing or selecting suitable equipment.

6 April 2024 in Chemengineering
Verified
Journal Article
Open access
PDF file
IBIoan Barabulica
Ioan Barabulica
MSMarius Sebastian Secula
Marius Sebastian Secula
AAAdriana-Mariana Asoltanei
Adriana-Mariana Asoltanei
Eugenia Teodora Iacob-TudoseEugenia Teodora Iacob-Tudose
Eugenia Teodora Iacob-Tudose
GLGabriela Lisa
Gabriela Lisa
IMIoan Mamaliga
Ioan Mamaliga
This manuscript presents an experimental study focusing on the combustion of magnesium in an atmosphere depleted of oxygen. The study explores various mixtures of carbon dioxide and nitrogen, examining their impact on the combustion performance. The experimental design involved evaluating how the carbon content influences combustion parameters. Temperature profiles were analyzed to elucidate different stages of the combustion process. Furthermore, the effects of pressure (2 and 3 ata) and the composition of CO2-N2 mixtures (10%, 19.5%, 35%, 48%, 72%, and 80% CO2 content) on magnesium combustion, including ignition time, maximum temperature, and post-combustion temperatures, were investigated. The results revealed a substantial impact on the ignition delay and combustion time, with the ignition delay decreasing with higher chamber pressure. The combustion process, especially with regard to the ignition time and heat of combustion, was notably affected by CO2 concentration. The morphology of the combustion residue from the magnesium microparticles was characterized using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDX). The reaction of Mg with CO2 represents a promising energy source, quickly releasing a substantial amount of heat with a very low quantity of Mg. The estimated value of the heat of combustion for magnesium in N2-CO2 atmosphere is 78.4 kJ mol−1.

25 June 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
AAAdriana-Mariana Asoltanei
Adriana-Mariana Asoltanei
Sebastian George MaxineasaSebastian George Maxineasa
Sebastian George Maxineasa
CAConstantin Eugen Ailenei
Constantin Eugen Ailenei
MSMarius Sebastian Secula
Marius Sebastian Secula
IMIoan Mamaliga
Ioan Mamaliga
Dorina Nicolina IsopescuDorina Nicolina Isopescu
Dorina Nicolina Isopescu
This study critically addresses the challenge of selecting optimal insulation materials for contemporary, energy-efficient building envelopes, a decision with profound environmental, structural, and occupational health consequences. The paper responds to the growing demand for sustainable, resilient solutions by comparing wool, a bio-based, regenerative material, and expanded polystyrene (EPS), a synthetic polymer widely implemented in the construction industry, and advanced laboratory testing (thermal conductivity, moisture buffering, freeze–thaw resistance) is discussed in a comprehensive synthesis of the recent literature. Also, field evaluations from European retrofits and pilot projects (UK, Denmark, Finland, Iceland, Norway, Sweden, Germany and France) further contextualize performance outcomes, and life cycle impacts are considered. Recent results reveal that wool insulation achieves a moisture buffering value (MBV) between 1.8 and 2.7 (g/m2) % RH, minimal vapor resistance (mvr = 1–2), and preserves functional and structural integrity through more than 100 freeze–thaw cycles, leading to significant stabilization of the interior microclimate and enhanced durability. In contrast, EPS delivers lower thermal conductivity (0.032–0.037 (W/mK), critical for reducing heating/cooling demand, but exhibits limited vapor permeability (lvp = 60–150 MN·s/(g·m)), increased risk of condensation and mold, and reduced compressive strength (<22% after 30 cycles), especially when ventilation details are inadequate. Hybrid envelope systems leveraging both EPS and wool are demonstrated to optimize energy efficiency (up to 23% seasonal savings) and reduce interior humidity fluctuations, while lifecycle and recycling assessments show wool panels to be markedly superior in carbon footprint reduction and circularity. The stratification of insulation layers incorporating wool for vapor and moisture control, and EPS for pure thermal resistance is emerging as best practice in sustainable retrofit and new-build projects. Recommendations highlight the necessity for rigorous laboratory validation, international standards alignment, and integrated material design for robust hygrothermal comfort and environmental performance. The review also covers wool- and EPS-based hybrid composites, showing how natural fibers can improve key mechanical properties without compromising thermal insulation performance or environmental benefits.