In recent year, fatty acids (FAs) are heavily studied for heat storage applications and they have shown promising advantages over other organic phase change materials (PCMs). Among the FAs; capric, palmitic and stearic acids are the most studied PCMs. Several researchers have investigated these FAs and tried to improve their thermal properties, mainly by adding different high conducting fillers, such as graphite, metal foams, CNTs, graphene etc. In most cases, these fillers improved the thermal conductivity and heat transfer property but reduce the heat storage capacity considerably. These composites also lose the mixing uniformity during the charging and discharging process. To overcome these issues, selected FAs were grafted on the functionalized CNT surfaces and used as conductive fillers to prepare FA based composite PCMs. This process significantly contributed to prevent the drastic reduction of the overall heat storage capacity and also showed better dispersion in both solid and liquid state. Thermal cycling test showed the variations in the thermal energy storage values of all composite PCMs, however, within the tolerable grade and they had appreciable phase change stability and good chemical stability even after 2,000 cycles.
Fatty alcohols have been identified as promising organic phase change materials (PCMs) for thermal energy storage, because of their suitable temperature range, nontoxicity and can be obtained from both natural and synthetic sources. Like all other organic PCMs, octadecanol (OD) as PCM suffers from low thermal conductivity (TC). In this work, to enhance its TC, it was grafted on the functionalized MWCNT and were used as a conductive filler to enhance overall thermal properties of OD in a composite PCM (CPCMs) structure. The OD/OD-g-MWCNT sample showed better dispersion within the composites and the presence of additional OD boosted the overall heat storage enthalpy compared to that of plane composite sample with OD/MWCNT. In a non-quantitative approach, it was observed that, any increase in grafting ratio of OD increases the heat storage enthalpy of the composites. The heat storage enthalpy of (267.7 J/g) OD/OD-g-MWCNT(4:1)-5wt% composite PCM had reached very close to the heat storage enthalpy value of pure OD (269.3 J/g), and much higher than that of OD/MWCNT-5wt% (234.5 J/g). Champion sample i.e. OD/OD-g-MWCNT (4:1)-5wt%, showed good heat storage enthalpy, cycling performance, thermal stability and TC enhancement by 262.5%.
1 August 2018 in Journal of Electroanalytical Chemistry