Conventional computation techniques face challenges of deviations in Moore's law and the high‐power consumption of data‐centric computation tasks. Neuromorphic engineering attempts to overcome these issues by taking inspiration from neuron assemblies, ranging from distributed synaptic plasticity through orchestration of oscillator‐like action potential toward avalanche dynamics. Although solid networks of nanoparticles (NPs) are proven to replicate fingerprints of criticality and brain‐like dynamics, the aspect of dynamic spatial reconfigurations in the connectivity of networks remains unexplored. In this work, Ag/poly(ethylene glycol) (PEG) nanofluids are demonstrated as potential systems to mimic the spatio‐temporal reconfiguration of network connections. The nanofluids are prepared by directly loading Ag NPs from the gas aggregation cluster source into liquid PEG. The NPs exhibit a negative zeta potential in PEG; if the potential difference is applied between two electrodes submerged in this nanofluid, the NPs migrate toward the anode, accumulate in its vicinity, and form a conductive path. Spikes of electric current passing through the path are detected, accompanied by resistive switching phenomena, similar to the random switching dynamics in solid NPs networks. The unique behavior of Ag/PEG nanofluids makes them promising for the realization of spatio‐temporal reconfigurations in network topologies with the potential to transition to 3D.

A detailed characterization of phase transformations in the heat-treated commercial 7075 aluminum alloys without/with low Sc–Zr addition was carried out. Mechanical and electrical properties, thermal and corrosion behavior were compared to the microstructure development. The eutectic phase consists of four parts: MgZn₂ phase, Al₂CuMg phase (S-phase), Al₂Zn₃Mg₃ phase (T-phase), and primary λ-Al(Mn,Fe,Si) phase. Strengthening during non-isothermal (isochronal) annealing is caused by a combination of formation of the GP zones, η’-phase, T-phase and co-presence of the primary and secondary Al₃(Sc,Zr)-phase particles. Positive influence on corrosion properties is owing to the addition of Sc–Zr. Positron annihilation showed an evolution of solute Zn,Mg-(co-)clusters into (precursors of) the GP zones in the course of natural ageing. The concentration of the (co-)clusters is slightly negatively affected by the low Sc–Zr addition. A combination of both precipitation sequences of the Al–Zn–Mg–Cu-based system was observed. The apparent activation energy values for dissolution/formation of the clusters/GP zones and for formation of the metastable η’-phase, stable T-phase and stable η-phase were calculated.

Al-Li based alloys are attractive materials for the aerospace industry. The twin-roll casting of such materials could provide properties not achievable by conventional direct-chill casting and downstream processing methods due to significantly higher solidification rates. An Al-Li-Cu-Mg-Zr alloy was twin-roll cast with the same alloy containing a small addition of Sc. The microstructure of as-cast materials and the influence of Sc on the behavior of the alloy at elevated temperatures were studied by means of light and electron microscopy and by resistivity measurements. A fine-grained structure was formed during twin-roll casting, but several surface and internal defects were found on the strips, which should be suppressed by a further adjustment of the casting conditions. The addition of Sc had a positive effect on grain size uniformity and microstructure stabilization at elevated temperatures, as shown by the precipitation of a fine dispersion of coherent Sc- and Zr-containing precipitates.