Finite Element (FE) model updating is crucial for identifying key parameters in structural design and improving predictive accuracy. Despite extensive research on advanced FE procedures approved for user applications, persistent disparities remain in real-world scenarios, especially for complex materials like wood. Capturing accurate mechanical characteristics with traditional models poses challenges in sustainability projects. This study introduces a derivative-free model updating procedure using a Single-Objective Optimisation (SOO) incorporating observed and predicted natural frequencies and vibration modes. The objective function optimises tuning parameters to minimise discrepancies between predicted and observed outcomes. The focus is on Cross-laminated Timber (CLT), a composite wooden structure gaining traction as a sustainable alternative to materials like reinforced concrete and steel. However, the mechanical properties of CLT can vary due to inherent variability in wood’s mechanical characteristics. This research identifies sensitive mechanical properties — longitudinal Young’s modulus, internal shear moduli, and rolling shear modulus of CLT — using a model updating procedure based on a comprehensive set of data from Experimental Modal Analysis (EMA). The study provides mathematical algebraic derivations of the updating procedure and a step-by-step implementation algorithm to facilitate practical application in structural engineering.
Cross-laminated timber (CLT) as a prime example of an innovative product within the field of civil engineering has over the recent years attracted attention of the construction industry and engineers around the world. As a natural composite with different orientation of layers in addition to anisotropic properties of wood, CLT can be a challenging material in predictive numerical modelling. This is possibly due to uncertainty in the mechanical behaviour of the material owing to its growing conditions. In addition, timber structures are more sensitive to vibrations and structure-borne sound at low frequencies than conventional concrete based structures. Therefore, a thorough understanding of dynamic characteristics of CLT and accurate predictive models can enhance its potential in the construction industry. This work presents a numerical and an experimental modal analysis of CLT beams within a frequency range relevant for vibrations and structure-borne sound. In the experimental investigation, a series of CLT beams with dimensions 120 × 120 × 2000[mm3], cut from a larger CLT plate, composed of two covering layers of Norway spruce and a mid-layer of Scots pine are studied. Resonant frequencies, bending and torsional modes are utilised for a thorough study of the beams. The results are presented in terms of statistical variation in experimental resonant frequencies. Furthermore, a numerical sensitivity study with respect to variation in the mechanical properties of CLT is presented.