This study focuses on changes in the friction characteristics of paved roads under various conditions from the viewpoint of traffic safety. In general, the braking characteristics of road vehicles are examined using the μ–s characteristics of the tires. Therefore, in our research, we used three types of limited datasets and identified them using the Magic Formula proposed by Prof. Pacejka. Based on various experiments, it was shown that changes in the road surface environment, such as dry and wet conditions, significantly affect the μ–s characteristics, and this influence varies significantly depending on the pavement conditions. In this study, as the first stage of the analysis of these influences, it was clarified that the difference in the friction characteristics of wet and dry road surfaces varies significantly depending on the pavement surface, which is based on experimental results obtained using actual roads. As this variation is closely related to the safety of actual road traffic, we used a brush model, which is a dynamic model of the road surface and tires, to clarify the differences in this characteristic.

The Personal Mobility Vehicle (PMV), which has an inward-tilting angle, turns with lateral force due to a large camber angle, so it is necessary to consider the lateral movement of the tire vertical load axis during turning. Although the steering torque mechanisms are very different from those of automobiles, there are not many studies of the steering torque mechanisms of PMVs. In this paper, based on the effects of the force of six components acting on the tires, a method for setting the steering axis specifications is derived, including the geometrical minimization of steering moment disturbance due to the vertical load reaction force during turning. Automobile tires have a significant ground camber angle when traveling on rutted roads, but they do not have it on slanted roads because the vehicle body tilts along the road surface. On the other hand, in PMVs, the vehicle body always keeps upright when traveling both on slanted roads and on rutted roads. Therefore, the tires have ground camber angles on both types of road surface. We study the straight running ability under such road surface disturbances based on the geometrical minimization of steering moment disturbance due to the vertical load reaction force during turning. This straight running ability can be a remarkable strong point of PMVs with an inward tilt mechanism. In this study, it was proved that the steering axis parameters can be derived uniquely by taking into consideration the requirement to zero the moment (disturbance) around the steering axis due to the reaction force against the vertical load at all internal tilt angles.

This study focuses on the possibility of constructing a database on friction coefficients for actual roads from the viewpoint of traffic safety. A measurement algorithm is established to construct a road friction-measuring device. Next, the tires are selected for use in the measurements and their characteristics are measured using a bench tire characteristic tester. The measuring device is designed and constructed based on these characteristics. Finally, using this device, the measurement results of the road friction characteristics for two types of road surfaces are presented.

This study deals with the possibility of construction of a database on the braking friction coefficient for actual roads from the viewpoint of traffic safety, especially for automated driving, such as level 4 or higher. At these levels of automated driving, the controller needs to control the vehicle. However, the road surface condition, especially the road friction coefficient on wet roads and snowy or icy roads, changes greatly, and in some cases, changes by almost one order. Therefore, it is necessary for the controller to constantly collect environment information, such as the road friction coefficients, and prepare for emergencies, such as obstacle avoidance. However, at present, the measurement of the road friction coefficients is not systemically performed, and a method for accurately measuring has not been established. In order to improve this situation, this study examines a method for continuous measurement of the road friction characteristics, such as the μ-s characteristics. It is shown that the μ-s characteristics are continuously measured using the MF generally used in tire engineering, and the friction characteristics identified from the results are sufficiently satisfactory.

This paper deals with the possibility for construction of the database on friction coefficient on the actual roads from the viewpoint of traffic safety. A measurement algorithm is determined in order to construct road friction measuring device. Next, the tires used for measurement are selected and the characteristics are measured using bench tire characteristic tester, and the measuring device is designed and constructed based on the characteristics. Finally, using this device, the measurement results of the road friction characteristics for two types of road surfaces are shown.

In recent years, novel Personal Mobility Vehicles (PMVs) with a narrow width and an inward tilting mechanism, similar to motorcycles (MCs), have been proposed to prevent overturning during turns. Due to their compact size, these vehicles have inherent limitations in collision safety, making their dynamic safety and accident avoidance capabilities particularly crucial. In this study, a comparative analysis was conducted using a simulated single lane change course to evaluate obstacle avoidance performance. The results reveal that PMVs equipped with an active inward tilting mechanism exhibit superior obstacle avoidance capabilities. Based on the roll moment equilibrium conditions of these vehicles, an investigation of vehicle states during avoidance maneuvers revealed that both actual and virtual tilt angles coexist in PMVs, and their combined equivalent tilt angle effectively balances the roll moment during turning. This unique mechanism, which integrates the responsiveness of passenger cars with motorcycle-like tire lateral force characteristics, underpins the exceptional obstacle avoidance capabilities of actively inward-tilting PMVs.