Ming Wang

Mr. Ming Wang


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2025 in Physics of Fluids
Verified
Journal Article
Closed access
CLChao Lv
Chao Lv
JYJin-Xuan Yin
Jin-Xuan Yin
NWNing Wei
Ning Wei
YLYang Liu
Yang Liu
MWMing Wang
Ming Wang
HZHong-liang Zhao
Hong-liang Zhao
To investigate the influence of nozzle design on the homogeneity of mixing and smelting efficiency within a double-sided blowing furnace during the smelting process, a computational fluid dynamics simulation was carried out using the volume of fluid model, and the realizable turbulence k-ε model to simulate the liquid flow within the furnace. Analysis of furnace velocity distribution across operating conditions revealed that penetration depth variations correlated with bubble generation, bubble growth, bubble rise, and bubble breakage. To optimize molten pool mixing efficiency, four nozzle configurations were proposed: (1) cone straight shape; (2) excessive rounded corners; (3) conical; (4) anti-conical. Among these improved nozzle types, the conical nozzle demonstrated the best improvement effect. Compared to the ordinary nozzle, the dead zone proportion decreased by 16.57% and the penetration depth increased by 57.28%. Furthermore, this study also proposes combining nozzle types with distribution patterns. The relative conical mode stands out, showing an average velocity increase in 117.37%, a 37.17% reduction in dead zone proportion, and a 45.06% decrease in splash mass, compared to the ordinary nozzle.

15 April 2026 in Processes
Verified
Journal Article
Open access
PDF file
ZTZhang Ting'an
Zhang Ting'an
NWNing Wei
Ning Wei
HZHong-liang Zhao
Hong-liang Zhao
MWMing Wang
Ming Wang
HZHanwen Zhang
Hanwen Zhang
HQHongru Qiu
Hongru Qiu
With the decreasing availability of high-quality mineral resources and the increasing complexity of ore properties, efficient and sustainable flotation technology has become a research focus in the field of mineral processing. To optimize the taper angle of the air distributor in a KYF flotation machine, numerical simulation was used in this study to investigate its influence on the internal flow field, gas-phase characteristics, structural pressure distribution, and stirring power consumption. The results show that the peak turbulent kinetic energy and gas holdup are concentrated in the shear zone between the impeller and stator. Under the +5° condition, the peak turbulent kinetic energy is the lowest, while its vertical distribution is the most uniform. The peak gas holdup in the impeller–stator region reaches 19.2%, and the number of efficient bubbles with a diameter of 0.5 mm reaches 3.8 × 106 per m3, which is significantly higher than under the other conditions. During stable operation, this condition exhibits the lowest stirring power consumption at 126.0 W, which is 7.557% and 4.255% lower than under the −5° and 0° conditions, respectively. The optimal taper angle is therefore determined to be +5°. However, the associated large pressure gradient on the impeller surface may accelerate blade wear, indicating that surface strengthening measures should be considered to balance performance and durability.