This study considers the applications of natural fiber composites in affordable housing projects located in the two districts of Gujarat, India, and Gorkha, Nepal, with the goal of addressing issues of thermal comfort and lateral loading from seismic activity. To help alleviate some of these issues, the team worked with the Hunnarshala Foundation, in Bhuj, India, to develop a fiber cement composite that could be applied to the interior or exterior of a home and provide both insulative and structural improvements. Thermal conductivity of the composites comprised of various mixes were measured using a heat flux machine. Experimental results of 0.16–0.19 W/m·K showed an improvement in thermal conductivity compared to current wall cladding materials ranging from 1.60 to 1.88 W/m·K. Modeling of the building envelope was completed using the EnergyPlus™ tool and showed that homes using the fiber cement composites would have an overall reduction in heating and cooling requirements. The study used coconut husk fibers (referred to as coconut coir), rattan, and pine wood fibers in addition to Portland cement, fly ash, and hydrated lime in the fabrication of fiber cement composite samples. Flexural strength of natural fiber samples was 70% stronger than comparison specimens, suggesting possible application for wall cladding to reduce out-of-plane failure during seismic events. Field tests conducted in Gujarat validated lab results as well as qualitative perceptions of the material. Continued work with local partners presents several possible applications of coconut coir fiber cement composites for retrofit and new construction housing.
Ventilation, including fume hoods, consumes 40–70% of the total energy used by modern laboratories. Energy-conscious fume hood usage—for example, closing the sash when a hood is unused—can significantly reduce energy expenditures due to ventilation. Prior approaches to promote such behaviors among lab users have primarily relied on passive feedback methods. In this work, we developed a low-cost fume hood monitoring device with active feedback to alert lab users when a fume hood is left open and unused. Using data collected by the building management system, we observed a 75.6% decrease in the average sash height after installation of these “Motion and Sash Height” (MASH) alarms, which would result in a reduction roughly equal to 43% of the annual carbon emissions of a typical American vehicle, for each fume hood. The MASH alarm presented here reduced energy costs by approximately $1,159 per year, per hood, at MIT.
Night ventilation coupled with thermal mass is an effective means of reducing overheating in passive buildings. Successful systems require a high airflow rate coupled with enhanced convective heat transfer to the thermal mass. This work presents results for enhanced convection when the primary thermal mass is in the ceiling. Such mass distribution occurs, for example, in multi-story apartments in developing economies. Experimental results are measured in a scale model of a typical room. The original contribution is the use of upward-directed ventilation at an angle of 30° to 40° from a window located at a typical distance below the ceiling. At scaled air change rates of 4.9 air changes per hour, the measured convective heat transfer coefficient at the ceiling was 7.7 W/m2 K. In contrast, when air flowed horizontally from the window, the heat transfer coefficient was 3.5 W/m2 K or less, indicating that substantial improvement was gained by directing airflow toward the ceiling. To link the experimental results to an application in a full-size building, an approximate model is presented to estimate the impact of directed night ventilation on the thermal mass (specifically the concrete slab ceiling) and room air temperatures. Coupling angled flow with nighttime ventilation, the ceiling slab and peak daytime air temperature can be reduced by 5 °C compared to horizontal ventilation from a window at conventional height. These results have enabled collaborators in Gujarat, India, to launch tests in a full-scale home serving a low-income community without access to air conditioning.
Although current industry guidelines to control the spread of SARS-CoV-2 (COVID-19) have adopted a six-foot (∼1.8m) spacing between individuals indoors, recent evidence suggests that longer range spread is also responsible for infections in public spaces. The vehicle for long-range spread is smaller droplets or particles, termed bio-aerosols, or aerosols for short, which have a large surface area to volume ratio such that aerodynamic drag is much larger than gravity forces. The aerosols remain suspended in air for extended time periods and they essentially move with air currents. Prediction of the danger to occupants in a closed room when exposed to an infected individual requires knowledge of the period of exposure and the concentration level of aerosols in the breathing zone of an occupant. To obtain an estimate of the concentration level, a common assumption is well-mixed conditions within an interior space. This is obtained from a mass balance between the level of aerosol produced by an infected individual along with the airflow rate into and out of the entire space. In this work, we use computational fluid dynamics, verified by experimental results, to explore the aerosol concentration distribution in a typical classroom for several common conditions and compare these results to the well-mixed assumption. We use a tracer gas to simulate the flow and dispersion of the aerosol-air mixture. The two ventilation systems examined, ceiling diffusers and open windows, yield average concentrations at occupant breathing level 50% greater than the well mixed case, and some scenarios yield concentrations that are 150% greater than the well mixed concentration at specific breathing-level locations. Of particular concern are two conditions: horizontal air flow from an open window in line with a row of seating and, second, an infected individual seated near a sealed cold window. For the former, conditions are improved if a baffle is placed inside the open window to direct the air toward the floor, creating a condition similar to displacement ventilation. In the latter, the cold air flowing down along the cold window recirculates aerosols back into the breathing zone. Adding window covers or a portable heater below the window surface will moderate this condition.