Synthetic organic dyes are coloring agents used in various industries. Despite the fact that they offer exciting colors and long-lasting effects, certain organic dyes can have harmful impacts on human health and aquatic ecosystems. This study investigates the photocatalytic degradation of malachite green dye using NiTiO2 nanoparticles (NPs) and NiTiO2/PANI nanocomposites (NCs) in various reaction conditions. The surface and compositional change of synthesized photocatalysts were characterized by XRD, FTIR, AAS, and UVvis spectrophotometer. Accordingly, the XRD results signify the crystal structure of photocatalysts found to be tetragonal anatase phase while the FT-IR spectra indicate the titanium has predominantly form a coordination compound upon reaction with nitrogen atom through weakening the bond strength between CN, CC, and CN in the PANI. The UVvis measurement shows that the energy bandgaps were decreased from 3.20 to 2.77eV and 2.59eV for NiTiO2 NPs and NiTiO2/PANI NCs, respectively. From AAS data, the authors confirmed that Ni metal has significantly existed in the aforementioned photocatalysts after the calcination process. The photocatalytic degradation of NiTiO2 NPs and NiTiO2/PANI NCs on the model dye has studied and their efficiency was 94.22 and 99.09, respectively. The photocatalytic degradation follows pseudo-first order with 2.2310−2min−1 reaction rate at optimum conditions of pH 8.5, initial dye concentration of 0.2g/L, catalyst load of 0.2g/L, and irradiation time of 90min. With this, the outstanding result recorded using NiTiO2/PANI NCs is ascribed to the smaller particle size as compared to NiTiO2 NPs, and it is found to be the promising photocatalyst for the removal of wastewater containing organic dyes.
The quality of natural waters could be deteriorated by organic pollutants which can impose a risk to the ecosystem as well as human health. These organic contaminants are often needed to be removed with adequate techniques. In this study, the photocatalysts of CdO nanoparticles (NPs), Ag–CdO nanocomposites (NCs), and Ag–CdO/polyaniline (PANI) NCs were successfully synthesized in order to investigate their degradation performance against 3′,3″,5′,5″-tetrabromophenolsulfonphthalein (bromophenol blue, BPB) dye. The crystal structure, functional groups, morphological change, and degradation efficiency of as-synthesized photocatalysts were characterized using XRD, FTIR, SEM and UV-Visible spectroscopic techniques respectively. The SEM result showed that the surface morphology of the nanomaterials seems the agglomerated micron-scaled grains as compared to CdO NPs and Ag–CdO NCs. The FT-IR spectrum demonstrated the absorption peaks which strongly confirmed that Ag–CdO NCs surface was successfully modified with PANI. The highly sharp and intensive XRD patterns attributed to the cubic structure for CdO NPs and Ag–CdO NCs structures with decreasing crystalline size from 40.58 nm to 36.43 nm and 10.29 nm upon CdO NPs photocatalyst surface treatment with Ag metal and PANI. The decreased particle size brought about to narrow the bandgap from 2.76 eV to 1.61 eV and 1.58 eV respectively. Among the synthesized photocatalysts, Ag–CdO/PANI NCs exhibited the best degradation efficiency of 97.30 % at pH 6, 10 ppm concentration of dye, 0.140 g of catalyst load, and 210 min irradiation time. Moreover, the kinetics of photodegradation of model dye at optimum conditions followed pseudo-second order reaction with the rate constant of 8.56 × 10-2 M-1min-1. The results suggested that, the developed treatment method for this particular dye could be applicable for the treatment of wastewater samples containing acidic dyes.
Plant extracts play critical role in synthesizing nanomaterials for a wide range of applications in human health and managing environmental pollutions. The present work focuses on varying CuO NP’s concentration in ZnO/CuO nanocomposites (NC) synthesized with orange peel extracts (ZnO/CuO WE NC) for its antibacterial activities. The concentration of CuO with respect to ZnO NP fixed in 10:10, 10:20, 10:30, and 10:40. The as-synthesized NC is characterized using UV-Vis, FTIR, XRD, and SEM spectroscopes. Accordingly, the UV-Vis result reveals that the absorption spectra range from 312-328 nm confirming the incorporation of extract to provide strong absorption peaks along with the increasing concentration of CuO in the nanocomposite while it energy band gap of ZnO/CuO WE NC was narrowed from 3.97 to 3.78 eV. FTIR analysis revealed that the stretching vibration of Zn-O and Cu-O are observed around 480 cm-1 and 600 cm-1, respectively in all ratios of WE NC. XRD indicated that the formation of hexagonal wurtzite structure and the crystallite size recorded in 24.12 to 3.17 nm. The SEM image showed the morphology of 10:20, 10:30, and 10:40 are aggregated, smooth, polished, and smaller size compared to 10:10 ZnO/CuO WE NC. The antibacterial activities of 10:10, 10:20, 10:30, and 10:40 ZnO/CuO WE NC were remarkable especially, 10:40 ZnO/CuO WE NC provided strong activity against P. aeruginosa. Thus, the assynthesized 10:40 ZnO/CuO WE NC is so profound to combat bacterial infectious diseases.