Ceria supported metal catalysts often exhibit high activity in the preferential oxidation (PROX) of CO in H2-rich stream and doping the ceria support with other metals proves to be rather effective in further enhancing their catalytic performance. Therefore, in this work, a series of ceria materials doped with Mn, Fe and Ni (CeM, where M = Mn, Fe and Ni; M/Ce = 1/8) were synthesized by a modified hydrothermal method; with the doped ceria materials (CeM) as the support, various supported gold catalysts (Au/CeM) were prepared by the colloidal deposition method. The influence of metal dopant on the performance of these ceria materials supported with gold catalysts in CO PROX was then investigated in detail with the help of various characterization measures such as N2 sorption, XRD, TEM, Raman spectroscopy, H2-TPR, XPS and XAS. The results indicate that the incorporation of Mn, Fe and Ni metal ions into ceria can remarkably increase the amount of oxygen vacancies in the doped ceria support, which is beneficial for enhancing the reducibility of ceria, the metal-support interaction and the dispersion of gold species. Although the gold catalysts supported on various doped ceria are similar in the size and state of Au nanoparticles, the CO conversions for CO PROX over Au/CeMn, Au/CeFe and Au/CeNi catalysts are 65.6%, 93.0% and 48.2%, respectively, much higher than the value of 33.6% over the undoped Au/CeO2 catalyst at ambient temperature. For CO PROX over the Au/CeNi catalyst, the conversion of CO remains near 100% at 60–130 °C, with a PROX selectivity to CO2 of higher than 50%. The excellent performance of Au/CeNi catalyst can be ascribed to its large amount of oxygen vacancies and high reducibility on account of Ni incorporation. The insight shown in this work helps to clarify the doping effect of other metals on the physicochemical properties of ceria, which is then beneficial to building a structure-performance relation for ceria supported gold catalyst as well as developing a better catalyst for removing trace CO in the hydrogen stream and producing high purity hydrogen.
Sheaf-like CeO2 (CeO2-S) in microscale was prepared by the hydrothermal method, and then etched with KOH aiming to obtain an imperfect fluorite structure (CeO2-SK) with high content of oxygen vacancies and oxygen mobility. With CeO2-S and CeO2-SK as supports respectively, a modified colloidal deposition method was employed to obtain Pd/CeO2 catalysts for being used in lean methane combustion. According to the inductively coupled plasma (ICP), N2 physisorption and scanning electron microscopy (SEM) results, the Pd supported catalysts are very similar in their Pd loading, surface area and morphologies. SEM and transmission electron microscopy (TEM) results revealed various nanorods exposed CeO2 (110) and (100) facets on Pd/CeO2-SK surface after KOH etching. Raman spectra and H2-temperature programmed reduction (H2-TPR) results indicated that Pd/CeO2-SK catalyst has a much higher content of catalytic active PdO species than Pd/CeO2-S catalyst. It was also found that the catalytic performance of Pd/CeO2 in lean methane combustion depends greatly upon the exposing crystal planes and oxygen vacancies content of sheaf-like CeO2, and Pd/CeO2-SK exhibits higher activity than Pd/CeO2-S. The larger amount of CeO2 (110) and (100) planes on Pd/CeO2-SK surface can enhance the formation of oxygen vacancies, active Pd species and migration of lattice oxygen, which all evidently improve the redox ability and catalytic activity of the Pd/CeO2-SK catalysts in lean methane combustion.
8 December 2025 in Russian Journal of Physical Chemistry A
The structural, electronic and nonlinear optical (NLO) properties of BN-substituted graphdiyne (BNGDY) with the doping of Li3NM (M = Li, Na, and K) alkalides are systematically studied using density-functional theory calculations, in order to disclose the effect of the alkalides on molecular optical properties. The results show that the Li3NM alkalides can stably adsorb on the surface of six planar BNGDY structures, of which the structures with small substitution ratios of BN-pairs on diacetylenic linkages exhibit strong chemical stabilities. Moreover, the Li3NM alkalides have the slightly increased charge transfer with alkali metals from Li to K, and that is a decreasing trend with increasing BN substitution ratios (A → F) on GDY. More interestingly, the successive introduction of the alkalides on BN-substituted graphdiyne can effectively modulate the electronic properties and nonlinear optical responses of the systems. Importantly, the BNGDY structure (D) with the doping of Li3NLi on triangular hole possesses the excellent nonlinear optical performance with much larger first hyperpolarizability values (e.g., 1.890 × 106 a.u.), which can be further understood by the analysis of the first hyperpolarizability density and the two-level model from the excitation energy calculations. This study will inevitably provide an excellent strategy for designing the next generation high-performance NLO materials.