The quality of Li–solid electrolyte interface is crucial for the performance of solid-state lithium metal batteries, particularly at low stack pressure, but its dynamics during cell operation remain poorly understood due to a lack of reliable operando characterization techniques. Here, we report the evolution of Li–electrolyte interface with high spatial resolution using operando scanning electron microscopy under realistic operating conditions. By tracking the stripping process of both Li and Li-rich Li-Mg alloy anodes, we show that multiple voids coalesce into a single gap and eventually delaminate the interface in Li, whereas the voids split and collapse to partially recover interfacial contact in Li-Mg. Density functional theory calculations show that the stronger Mg-S interaction at the metal–electrolyte interface attracts Mg toward the interface and repels Li-vacancies into the bulk, resulting in a reduced number of voids. The pressure-dependent voltage profiles of Li and Li-Mg stripping suggest that loss of contact due to void formation, rather than Mg accumulation at the interface, is the origin of high overpotential that limits the utilization of metal anodes. Improved interfacial contact enables stable cycling of all-solid-state lithium full cell at low stack pressure (1 MPa) and moderate rate (2 mA cm−2) simultaneously. The real-time visualization of Li–electrolyte interface dynamics provides critical insights into the rational design of solid-state battery interfaces.
Background: The blood pressure lowering effect of sesamin has been demonstrated to be associated with the increase in vascular nitric oxide (NO) biological activity by our previous studies and others. The present study was designed to explore the underlying mechanisms involved in the effect of sesamin on aortic NO bioactivity in spontaneously hypertensive rats (SHRs).Methods: Sesamin was orally administered for 8 consecutive weeks in SHRs. Systolic blood pressure (SBP) was measured using the tail-cuff method. The aortas were isolated and in vitro vascular reactivity studies were performed. Superoxide anion production in carotid arteries was assessed by dihydroethidium fluorescence staining. The protein expression of endothelial nitric oxide synthase (eNOS), phosphorylated eNOS (P-eNOS), dihydrofolate reductase (DHFR), nicotinamide adenine dinucleotide phosphate oxidase subunit p47phox, and copper, zinc superoxide dismutase (Cu/Zn-SOD) in aortas was detected by Western blotting. The dimeric form of eNOS in aortas was determined by low-temperature sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Aortic level of nitrotyrosine and activities of antioxidant enzymes, namely, total SOD (T-SOD), glutathione peroxidase (GPx) and catalase were also detected.Results: In SHRs, sesamin treatment reduced SBP, improved vascular relaxation induced by acetylcholine and enhanced aortic NO bioactivity. Sesamin treatment enhanced NO biosynthesis in SHR aortas was due to upregulated P-eNOS and suppressed eNOS uncoupling, and the latter effect might be attributed to decreased nitrotyrosine and upregulated DHFR. Sesamin also reduced the NO oxidative inactivation and decreased the superoxide anion production through downregulation of p47phoxand amelioration of eNOS uncoupling. In addition, sesamin treatment did not alter the levels of GPx and catalase activity but obviously reduced the compensatory elevated T-SOD activity and Cu/Zn-SOD protein expression.Conclusion: Chronic treatment with sesamin could reduce hypertension and improve endothelial dysfunction through enhancement of NO bioactivity in SHR aortas.
The spread of the COVID-19 epidemic has triggered realistic thinking about the renewal of traditional interior spaces. How to enhance the ability of future residents to cope with major emergencies through spatial resilience is an important concern for interior smart space design in the post-epidemic era. This paper discusses how to make effective use of interior layout, divide interior space more rationally and create a green and healthy interior space design, with three aspects of spatial emergency protection, spatial resilience and spatial affinity, and gives specific consideration to the transformation of interior smart space.
All-solid-state batteries are a promising next-generation energy storage technology due to their high safety and energy density. However, a major challenge for their practical applications is the need for high external pressures of up to tens of MPa to maintain intimate solid–solid contact and preserve ion/electron percolation pathways during operation. In this work, we demonstrate that low-hardness, creep-prone organic active materials, readily deformable to microstructural changes, enable stable cell operation under low external pressures. Using bistetraaminobenzoquinone (TAQ) as a model compound, we show that solid-state cells with TAQ-based cathodes achieve stable cycling and promising rate performance at external pressures as low as 1 MPa, retaining 80.3% capacity after 100 cycles. Operando and post-mortem scanning electron microscope reveal that TAQ electrodes maintain structural integrity after extended cycling, unlike inorganic LiNixMnyCozO2 (NMC) electrodes, which develop contact loss within the first cycle. We quantified the creep behavior of TAQ using nanoindentation under various loads. These findings highlight the promise of creep-prone materials in enabling solid-state battery operation under practically relevant external pressures.
Halide solid electrolytes (HSE) have shown remarkable stability against high-voltage cathodes. Some HSE, such as Li3InCl6 (LIC), can be readily synthesized via aqueous routes. Here, we expand the aqueous synthesis of LIC to include Y substitution, which has different hydration coordination strengths, to form Li3InxY1−xCl6 (LIYC, 0 ≤ x ≤1). This composition is intended to combine the high ionic conductivity of LIC with the superior stability of Li3YCl6 (LYC). We compared solution-synthesized products with those derived mechanochemically. We found that adding ammonium chloride in a 3:1 ratio to YCl3 + InCl3 produces a phase-pure product, with X-ray diffraction (XRD) revealing structure similarity for both routes. Through nuclear magnetic resonance (NMR) and impedance measurements, we evaluate how the synthesis method affects ionic transport, particularly regarding correlated motion. Despite lower initial grain boundary impedance in mechanochemical samples, full cells made from solution-synthesized samples show superior cycling performance. This work establishes a scalable aqueous synthesis route for LIYC that achieves properties comparable to traditional mechanochemical methods.