In this Letter, we present a novel, to the best of our knowledge, approach for recovering objects directly from the Fraunhofer diffraction integral, where the diffraction field of an object is approximated by the Fourier transform of this object augmented by an additional phase factor. This phase factor at the observation plane is universal for the diffraction fields generated by objects located at the same plane and illuminated by the same monochromatic plane wave. It can be first extracted from dividing the Fraunhofer diffraction field by the Fourier transform of an object reference. Rapid recovery for unknown objects is then enabled after applying a two-dimensional inverse Fourier transform to the ratio of the Fraunhofer diffraction fields to the phase factor. This approach is verified experimentally by constructing a modified Mach–Zehnder interferometer, with a digital micromirror device (DMD) generating the objects of desired structures. To record the Fraunhofer diffraction and interference patterns on a finite-size CCD camera, a convex lens is introduced with the CCD sensing surface positioned at the focal plane of the lens. The strategy described in [ Nat. Commun. 7, 10820 (2016)10.1038/ncomms10820 ] is applied to extract the phase of the diffraction field from the interference pattern. The results demonstrate the efficiency of our approach in swiftly and accurately recovering small objects with elimination of zero-order and conjugate images.
In the far-field approximation, an object’s diffraction field can be expressed as its Fourier transform multiplied by a phase factor. Here, we present a simple method with which to directly retrieve this phase factor from a single-shot off-axis interference pattern. By exploiting and adjusting its unique two-dimensional quadratic form, the quadratic contribution from the object’s Fourier transform can generally be neglected, particularly for amplitude-only objects and slowly varying phase objects. The phase factor is extracted by fitting a quadratic surface to the unwrapped phase obtained via Fourier-transform-based phase retrieval. Removing this factor enables precise reconstruction through a straightforward inverse Fourier transform, without requiring iterative computations. Compared with conventional far-field diffraction setups, our approach reduces system length and allows the use of smaller CCD sensors. Experimental validation using a modified Mach–Zehnder interferometer demonstrates high reconstruction accuracy and robustness. Overall, this method provides an efficient, practical, and real-time solution for object reconstruction, with the potential to simplify and miniaturize optical setups, offering an alternative approach to standard coherent diffraction imaging techniques.
The 1.4 micrometer spectral region is of considerable interest for medical diagnosis and laser therapy because of the strong absorption of water in this band. However, conventional rare-earth-doped silica fibers cannot easily provide pulsed fiber-laser operation near 1.4 micrometer. In this work, a homemade low-germanium bismuth-doped fiber was combined with a nonlinear amplifying loop mirror (NALM) to construct an all-fiber mode-locked laser. At a pump power of 150.0 mW, the laser delivered continuously tunable output over 1455.10-1470.35 nm, with a minimum pulse duration of ~228.7 fs, a signal-to-noise ratio (SNR) of ~59.0 dB, a mode-locking threshold of 51.0 mW, a maximum pulse energy of ~3.11 nJ, and a peak power of ~12.79 kW. This work demonstrates a stable, efficient, and tunable 1.4 micrometer ultrafast laser source on a robust silica-based all-fiber platform, providing a more practically deployable ultrafast source for biomedical applications, near-infrared spectroscopy and sensing, and future multi-band fiber-photonic systems operating in the water-absorption-sensitive window.