In order to study unsaturated creep behaviors of reticulate red clay under matric suction, a series of isotropic creep tests with different matric suction level were carried out by using Geotechnical Digital Systems (GDS) unsaturated apparatus. Results indicate that creep strain caused by matric suction increases with the increasing of matric suction level and tends to certain stability over time. Based on the analyses of test results, a creep model for the unsaturated reticulate red clay under matric suction was established to predict the creep strain caused by matric suction. In the model, a new parameter M (matric suction level) was defined as a ratio of the matric suction to the net confining pressure, a hyperbolic function was adopted for the description of the strain-time relationship and an exponential function was employed for the strain-M relationship. Predicted results are in good agreement with the test results shows that the model can reasonably simulate the effects of matric suction on creep properties of unsaturated reticulate red clay.
15 August 2022 in Bulletin of Engineering Geology and the Environment
Filter paper technique, humidity control technique and axis translation technique were used to study suction equilibrium time of unsaturated reticulate red clay. Test results show that: (a) suction equilibrium exists in both suction measurement or suction control using any technique in the tests; (b) suction equilibrium time of unsaturated reticulate red clay can be as short as several tens hour or several days for different suction measuring techniques, or long as several days or several tens day for different suction controlling techniques; (c) suction equilibrium time consumed in process of suction measurement is shorter than that of suction control using the same technique; (d) suction equilibrium time in measuring matric suction of unsaturated reticulate red clay using axis translation technique is shorter than that using filter paper technique; and (e) suction equilibrium time of drying process is much longer than that of wetting process, when suction is controlled using humidity control technique.
Matric suction creep is the creep of unsaturated soil caused by loading constant matric suction. Matric suction creep characteristics of reticulated red clay with constant net confing pressure and step-loading matric suction was studied using stress-controlling unsaturated triaxial test apparatus. Test and analysis results show that: (1) with constant net confining pressure, axial and radial strain of the clay caused by creep due to matric suction increases obviously; (2) the increments of axial strain of the clay, caused by creep due to matric suction under constant net confining pressure, is not the same as that of radial strain, and the absolute value of radial strain is bigger than that of axial strain; (3) creep strain produced by the same amount of matric suction decreases as the increasing of the matric suction during step loading creep, which means that matric suction makes the clay hard; and (4) the creep strain-time curves of both axial and radial creep can be simulated very well by exponential decay function, and the parameters of the function are matric suction depend obviously.
The performance of traditional steady grouting is sometimes limited; therefore, a new high-frequency pulsed grouting method is proposed. Through the CFD method, this paper studies the cement slurry penetration performance of cyclic grouting under the influence of pulsating pressure and steady pressure. Firstly, the penetration shape and flow fields of the two grouting methods are investigated. Secondly, the effects of pulsation parameters on penetration performance are studied. Finally, the influence of various working conditions, such as soil properties, grout parameters, grouting pipe length, and back pressure, on penetration distance is also investigated. The results show that pulsating grouting achieves better penetration performance compared with steady pressure grouting. With the increase in frequency, pulsating grouting exhibits superior performance, while with the increase in pulsation amplitude, the penetration distance initially increases and then decreases. This is because part of the pulsating pressure is lower than the back pressure, which weakens the pulsating effect. As viscosity and back pressure increase and as porosity and particle size decrease, the proportion of lateral diffusion in pulsating grouting relative to steady pressure grouting increases. This indicates that lateral penetration performance achieves optimal results under high-flow-resistance conditions. However, when the flow resistance becomes excessively high, the vertical penetration distance may be affected. This study is expected to improve the grouting efficiency and provide a better understanding of pulsating grouting design and operation.
1 April 2006 in Journal of Central South University of Technology