Biomass is an interesting candidate raw material for the production of renewable hydrogen. The conversion of biomass into hydrogen can be achieved by several processes. In particular, this short review focuses on the recent advances in glycerol reforming to hydrogen, highlighting the development of new and active catalysts, the optimization of reaction conditions, and the use of non-innocent supports as advanced materials for supported catalysts. Different processes for hydrogen production from glycerol, especially aqueous phase reforming (APR) and steam reforming (SR), are described in brief. Thermodynamic analyses, which enable comparison with experimental studies, are also considered. In addition, research advances in terms of life cycle perspective applied to support R&D activities in the synthesis of renewable H₂ from biomass are presented. Lastly, also featured is an evaluation of the studies published, as evidence of the increased interest of both academic research and the industrial community in biomass conversion to energy sources.

The use of lignocellulosic biomasses for the production of renewable hydrogen is surely among the hot-topic research tasks. In this review, we report on the recent advances in the catalytic conversion of cellulose and its derived C6-C5 sugars (glucose, fructose, and xylose) and polyols (sorbitol and xylitol) into hydrogen via aqueous phase reforming (APR) reactions. The APR processes are considered to be new sustainable catalytic routes for converting the carbohydrate fraction of biomasses into hydrogen at milder reaction conditions if compared with the traditional reforming reactions. Particular emphasis is given to the development of new and active catalysts and to the optimization of reaction conditions that aimed to maximize hydrogen production with a low concentration of CO avoiding, at the same time, the formation of alkanes.

This short review reports on spinel-type mixed oxides as catalysts for the transformation of biomass-derived building blocks into chemicals and fuel additives. After an overview of the various methods reported in the literature for the synthesis of mixed oxides with spinel structure, the use of this class of materials for the chemical-loop reforming of bioalcohols is reviewed in detail. This reaction is aimed at the production of H₂ with intrinsic separation of C-containing products, but also is a very versatile tool for investigating the solid-state chemistry of spinels.