The method of large-eddy simulation (LES) coupled with the density transport equation is employed to simulate the evolution of a gravity-driven high-density turbidity current and its interaction with a pair of parallel suspended pipes. The LES method is validated first using data of a non-Boussinesq lock-exchange experiment and satisfying agreement between LES and experiment is achieved. The simulations reveal that a shear region forms between high- and low-density fluids each moving in opposite directions which lead to the generation of a series of vortices and a substantial mixing region. Close to the bottom boundary, low-density fluid is entrained near the head of the high-density turbidity current, forming a thin water cushion that separates the turbidity current's head from the seabed, the so-called hydroplaning effect, thereby reducing the density of the head and bottom friction. The current study suggests that the effect of hydroplaning phenomena leads to high speed and long distance of the turbidity current. Further, LES simulations of a turbidity current impacting a pair of parallel suspended pipes with different streamwise spacings are performed and impact forces are quantified. The turbulent wake generated by high-density fluid bypassing pipe 1 promotes velocity fluctuations leading to increased impact forces on pipe 2 with increasing streamwise spacing up to 8 times the pipeline diameter (8D). The results suggest that the streamwise spacing between two parallel pipes should be less than 2D to minimize hydrodynamic loads on pipe 2.
The water surface response to subcritical turbulent flow over a backward-facing step (BFS) is studied via high-resolution large-eddy simulation (LES). The LES method is validated first using data of previously reported experiments. The LES-predicted water surface is decomposed into different types of gravity waves as well as turbulence-driven forced waves. Analysis of the LES data reveals the interplay between low-frequency large-scale turbulence structures, which are the result of flow separation from the step and reattachment behind the step, and the dynamics of the water surface. The water surface deformation is mainly the result of freely propagating gravity waves and forced waves, owing to turbulence in the form of rollers and/or hairpin vortices. Gravity waves with zero group velocity define the characteristic spatial and temporal scales of the surface deformations at higher frequencies, while large eddies determine their low-frequency modulation. These deformations are mainly confined in lateral bands that propagate downstream following the advection of the near-surface streamwise vortices (rollers) that are shed from the step. Steeper surface waves are observed in regions of negative perturbation velocity gradient and down-welling, downstream of the larger rollers, and are associated with thin isolated regions of high vorticity near the surface. The investigation of such a complex flow has shown that the decomposition of the water surface fluctuations into its different physical components may be used to identify the dynamics of the underlying flow structure.