In this paper, a Lotka–Volterra (L-V) competitor–competitor–mutualist system with time-varying delays is studied. Some dynamical behaviors of the considered system are investigated. Firstly, we obtain the boundedness, permanence and periodic solution of the system using the comparison principle of differential equations and inequality estimation method. Then, the global attractiveness of the system is analyzed by multiple Lyapunov functionals. Meanwhile, the existence and global attractivity of positive periodic solutions is derived. In the third section, in order to validate the practicability and feasibility of the obtained theoretical results, we conducted numerical simulations using MATLAB function ddesd. Finally, the fourth section is where conclusions are drawn.
To address the survivability and energy capture efficiency of Oscillating Wave Surge Converters (OWSCs) under extreme sea states, this study develops a high-fidelity numerical model coupling Riemann-based Weakly Compressible Smoothed Particle Hydrodynamics (Riemann-based WCSPH) with multi-body dynamics. This model is employed to systematically investigate the nonlinear interaction mechanisms between multi-frequency focused freak waves and an OWSC. The numerical simulations reproduce the target multi-frequency focused waves based on the linear theoretical spectrum, with the simulated crest agreeing with the first-order target within 0.09%. However, due to the inherent limitations of the first-order wave generation boundary, the model underpredicts the extreme nonlinear crest amplification observed in the physical Baldock experiments, though it satisfactorily captures the overall phase synchronization and wave packet envelope. The results reveal that under freak wave impacts, the dynamic response of the OWSC exhibits a prominent “velocity-dominated” characteristic: while the pitch angle response shows displacement saturation, the instantaneous angular velocity surges by 71% compared to regular wave conditions, subjecting the mechanical system to substantial instantaneous power flow shocks. Furthermore, the back-regulation mechanism of Power Take-Off (PTO) damping on the flow field is uncovered. It is found that high damping induces a significant “fluid blockage effect,” converting the flap’s wave-induced dynamic loading into an elevated quasi-static pressure buildup that deteriorates the structural loading environment. Parametric analysis indicates that the capture width ratio follows a unimodal trend with the damping coefficient. An approximate optimal damping coefficient ( $$C_{pto} \approx 60~\mathrm {N \cdot m \cdot s/rad}$$ ) is identified at which the capture width ratio is maximized, representing a favorable impedance-matching point between the hydrodynamics and the mechanical system; however, this damping level also corresponds to a substantially amplified peak structural load relative to the lightly-damped baseline, so that the identified condition reflects a trade-off between energy capture and structural loading rather than a simultaneous optimum for both.
1 January 2025 in Fluid Dynamics & Materials Processing
This study employs the Smoothed Particle Hydrodynamics (SPH) method to develop a computational fluid dynamics (CFD) model for analyzing the interaction between rogue waves and mooring systems. Four floating body configurations are investigated: (1) dual rectangular prisms, (2) rectangular prism–sphere composites, (3) sphere–rectangular prism composites, and (4) dual spheres. These configurations are systematically evaluated under varying mooring conditions to assess their hydrodynamic performance and wave attenuation capabilities. The model accurately captures the complex fluid–structure interaction dynamics between moored floating breakwaters and incident wave fields. Among the configurations, the dual rectangular prism system demonstrates superior performance in both wave dissipation and mooring force reduction. Under conditions involving dual wave makers, the influence of floating body shape and number on wave height is found to be minimal. However, dual-body arrangements consistently outperform single-body setups in terms of both energy dissipation and structural stability. From a cost-efficiency perspective, the configuration comprising two rectangular prisms connected via a single mooring system offers significant advantages in material usage and deployment feasibility.
In this paper, the Smoothed Particle Hydrodynamics (SPH) method is used in a C# environment to simulate the interaction between freak waves and bottom-fixed structures by establishing a fluid dynamics model. Paraview software 5.10.1 was used to analyze and visualize the simulation results. In order to simulate wave propagation accurately, the reliability of the model was verified by comparing experimental and simulated data. A two-dimensional numerical wave flume was established based on the SPH method, a conservative Riemann solver was introduced, a repulsive boundary condition was adopted, and a slope was used to eliminate wave reflection. Bottom-fixed structures of different heights and lengths, as well as different wave conditions, were selected to numerically simulate the interaction between freak waves and bottom-fixed structures. The results show that the height of bottom-fixed structures and wave conditions have a significant effect on hindering the propagation of rogue waves, while the length has little effect on the propagation of deformed waves. When the amplitude of the wave remains constant, both the period andthe duration of the deformed wave are longer. This research is of certain significance for the prediction of freak waves in marine engineering and the application and promotion of SPH methods.