Nondestructive Testing (NDT) assessment of materials’ health condition is useful for classifying healthy from unhealthy structures or detecting flaws in metallic or dielectric structures. Performing structural health testing for coated/uncoated metallic or dielectric materials with the same testing equipment requires a testing method that can work on metallics and dielectrics such as microwave testing. Reducing complexity and expenses associated with current diagnostic practices of microwave NDT of structural health requires an effective and intelligent approach based on feature selection and classification techniques of machine learning. Current microwave NDT methods in general based on measuring variation in the S-matrix over the entire operating frequency ranges of the sensors. For instance, assessing the health of metallic structures using a microwave sensor depends on the reflection or/and transmission coefficient measurements as a function of the sweeping frequencies of the operating band. The aim of this work is reducing sweeping frequencies using machine learning feature selection techniques. By treating sweeping frequencies as features, the number of top important features can be identified, then only the most influential features (frequencies) are considered when building the microwave NDT equipment. The proposed method of reducing sweeping frequencies was validated experimentally using a waveguide sensor and a metallic plate with different cracks. Among the investigated feature selection techniques are information gain, gain ratio, relief, chi-squared. The effectiveness of the selected features were validated through performance evaluations of various classification models; namely, Nearest Neighbor, Neural Networks, Random Forest, and Support Vector Machine. Results showed good crack classification accuracy rates after employing feature selection algorithms.

This paper presents a non-imaging landmine detection system that integrates a highly sensitive multiple-input multiple-output (MIMO) microwave sensor with a machine learning (ML) classifier for automated classification. The proposed sensor consists of two circular patch elements fed with two ports designed in a unique configuration, comprising a dual loop with a cross dipole, for enhancing sensitivity to changes in the environmental electrical properties (dielectric constant and electrical conductivity) induced by buried metallic objects. It operates in dual bands of 1.58 GHz and 1.75 GHz, within the operating frequency range of 1.3 to 2 GHz. The system’s performance was assessed using full-wave simulations and experimental measurements, involving a sand-filled foam container with a metal surrogate landmine placed at different depths. The sensor’s performance was evaluated by monitoring changes in the magnitude and phase of the reflection coefficient ($S_{11}$) and the transmission coefficient ($S_{21}$). The acquired scattering parameters data were processed using a Support Vector Machine (SVM) algorithm for automated classification. Results demonstrate the sensor’s high capability in detecting metallic targets at various depths and standoff distances. Compared to conventional imaging technologies, this system offers significant advantages in cost, simplicity, and ease of data processing. The SVM models trained on measurement data with proper feature selection showed a high level of agreement with their counterparts trained on simulation data. Stratified k-fold cross-validation was used to improve the reliability of accuracy metrics, with results showing 85% or higher mean accuracy in all classification scenarios.