In response to the higher requirements of pulsar navigation performance for deep space exploration and remote sensing missions (such as Earth-Moon navigation and space observation), this paper proposes a time-delay estimation for pulsar navigation based on Peak-trough Amplitude and Rayleigh Entropy (PARE) to further improve the estimation accuracy and calculation speed. Firstly, the Fast Folding Algorithm (FFA) is used to perform parallel profile folding. According to the convergence and significance characteristics of the folded profiles, the FFA 3-D peak-valley map is threshold screened to narrow the search range, achieve the preliminary positioning of the subsequent profile test range, and improve the efficiency of pulsar frequency calculation. Secondly, according to the high sensitive response characteristics of the peak-valley difference of the folded profiles to the test frequency, ‘peak-trough amplitude’ is introduced to perform weighted operation on Rayleigh entropy of the folded profiles, and the significance of the folded profiles are jointly tested from the amplitude and structural characteristics to improve the accuracy and stability of pulsar frequency estimation. Finally, the cross-correlation operation is used to estimate the time-delay of the folded profiles. We also conducted simulations, influencing factor analysis, and NICER satellite actual observation data verification for the PARE method and the $\chi ^{2}$ test method. NICER satellite data verification shows that compared with the $\chi ^{2}$ test method, the PARE method has a 77.83% increase in time-delay estimation speed and a 57.93% increase in time-delay estimation accuracy. In addition, this method is insensitive to changes in observation duration and has better estimation stability.
X-ray pulsar-based navigation (XNAV) is an ideal navigation mode for deep spacecraft. In order to overcome the time-varying frequency problem caused by the acceleration of spacecraft in the process of photons TOA data, this paper proposes an improved method called Non-uniform epoch folding (NUEF). Specifically, the paper analyzes the mechanism of the traditional EF method, and then divides the traditional method into two key stages: Density Analysis and Digital Filtering. Draws the conclusion that the key to limit the pulse time delay estimation accuracy of the traditional method is that the mathematical expectation of the photon density sequence obtained in the first stage of EF cannot maintain periodicity in a long observation time interval; Then the solution NUEF is given. NUEF method abandons the characteristic that bins uniformly distribute on time axis in traditional EF methods. This method uses the principle of equal phase interval to determine the position and length of each bin by introducing external velocity information, and theoretically overcomes the problem of time-varying frequency in the long observation interval; The simulation experiment verifies the effectiveness of NUEF method. Specifically, the pulse time delay estimation accuracy of NUEF method is improved compared to traditional EF method. And because of the elimination of the periodic search process, the computational complexity of the NUEF method has also decreased.
Aims. The accuracy of the pulsar period estimation directly affects the restoration effect of the signal profile. A more accurate pulsar profile will help improve the accuracy of pulsar delay estimation and thereby improve the performance of X-ray pulsar navigation. This paper proposes a pulsar period estimation method based on photon energy distribution folding and image template matching (PETM). Methods. This method uses the probability distribution information of photon energy for weighted epoch folding. The one-dimensional (1D) profile information was converted into two-dimensional (2D) image information through reverse space-filling curve (SFC) encoding. Then, a feature matching was performed between the target structure and the template structure. At the same time, the criterion of Pearson correlation coefficient (PCC) was used to quantitatively evaluate the matching effect to estimate the optimal period. Results. The simulation results show that the period estimation accuracy of the PETM method is significantly improved, as compared with the traditional χ2-test method. This work also analyzes the folding effect based on the photon energy distribution model and conducts simulation experiments and comparisons on influencing factors, such as noise interference and data quality. At the same time, we also specifically demonstrated the effectiveness of the PETM method for the glitch phenomenon (i.e., a sudden change in period) of pulsar periods. Finally, we also used China’s XPNAV-1 satellite to conduct experiments and analysis of the actual observation data of PSR B0531+21 pulsar within a fixed period of time. The results show that the period estimation accuracy of this method is 4.8190 ns, which is 50.23% higher than the traditional χ2-test method. The method proposed in this article has the advantages of high estimation accuracy, stable estimation performance, strong anti-interference ability, and excellent dynamic period estimation performance. Therefore, it can further improve the navigation performance of X-ray pulsars.
16 July 2025 in IEEE Transactions on Aerospace and Electronic Systems
Fewer isolated pulsars are available for X-ray pulsar navigation, and they are unevenly distributed spatially. In contrast, the number of available binary pulsar for navigation is promising. However, the challenges of using binary pulsars as navigation pulsars is significant time-varying systematic errors. Therefore, to develop a measurement model suitable for both binary pulsars and isolated pulsars, while effectively mitigating timevarying systematic errors, achieving significant navigation accuracy, we propose a second-differenced measurement model based on the phase and Doppler frequency shift of binary pulsars. To linearize the measurement model and reduce the impact of distance on systematic errors, we developed a first-differenced measurement model based on phase difference and Doppler frequency shift. To further suppress time-varying systematic errors, we propose a second-differenced measurement model, which is the difference between the first-differenced measurement model at the neighboring filtering time. For deep space spacecraft, time-varying systematic errors are of significant magnitude but change slowly over the filtering period. Therefore, the second-differenced measurement model effectively mitigates the majority of these errors. In addition, to address the issue of increased random errors caused by the seconddifferenced model, we derived a differential noise covariance matrix that can effectively suppress random errors within the traditional Extended Kalman Filter (EKF) framework. The simulation results demonstrate that the proposed method can simultaneously utilize binary pulsars and isolated pulsars for navigation. It effectively suppresses the impact of time-varying systematic errors, including pulsar direction error and linearization error, leading to improved navigation accuracy.