The continued advancement of organic electronic technology will establish organic electrochemical transistors as pivotal instruments in the field of biological detection. Here, we present a comprehensive review of the state-of-the-art technology and advancements in the use of organic electrochemical transistors as biosensors. This review provides an in-depth analysis of the diverse modification materials, methods, and mechanisms utilized in organic electrochemical transistor-structured biosensors (OETBs) for the selective detection of a wide range of target analyte encompassing electroactive species, electro-inactive species, and cancer cells. Recent advances in OETBs for use in sensing systems and wearable and implantable applications are also briefly introduced. Finally, challenges and opportunities in the field are discussed.
In this work, ZnO, WO3, and MgO were doped into InSnZnO (ITZO) films via co-sputtering to enhance the mobility and stability of ITO-based thin film transistors (TFTs). ITZO, InSnWO (ITWO) and InSnMgO (ITMO) films were fabricated, and the effect of cation dopants on the oxygen stoichiometry in ITO films was investigated. We further discussed their influence on the electrical parameters of corresponding TFTs, including threshold voltage (), subthreshold swing (SS), and field-effect mobility (). Additionally, the positive and negative bias stress stability of these devices was evaluated. The results demonstrate that ITWO TFTs exhibit superior stability despite a reduction in mobility. This is attributed to the high electronegativity of W6+ and the strong W-O bonding, which effectively mitigate the formation of oxygen vacancies and suppress the adsorption of impurities at the back channel. The findings provide valuable insights for the material design of high-performance TFTs.
Thin piezoelectric polymers provide a compliant route for converting transient biomechanical deformation into electrical signals, but wearable sensing also depends on how these high impedance signals are coupled to the electronic readout. This work presents a hybrid sensing platform that combines a piezoelectric film, an InSnZnO (ITZO) dual-gate thin-film transistor (DGTFT), and analog signal conditioning for dynamic force measurement and anterior neck motion sensing. The polymer film contains identifiable electroactive crystalline features and generates repeatable bipolar responses under cyclic loading. The coupled device exhibits gate-dependent drain current responses, while the complete readout provides a force-to-voltage sensitivity of 4.0 V/N over 0.5–1 N. Under continuous 0.5 N cyclic loading for 200 s, the output shows a 3.12% coefficient of variation and a 102.27% final-to-initial response ratio. Neck-mounted measurements further resolve different temporal signatures associated with coughing, swallowing, and pronunciation of “hello”. The results demonstrate a compact polymer-transistor sensing architecture that preserves dynamic mechanical information from controlled loading to wearable biomechanical acquisition.