Distributed optical vibration sensing (DOVS) provides dense spatiotemporal measurements for pavement and traffic monitoring, but nonstationary background noise, spatially confined responses, and data-quality anomalies complicate vehicle-event detection. This study presents a deterministic, training-free, and interpretable detector for single-lane highway DOVS matrices. The algorithm forms a detrended absolute-amplitude representation and combines percentile-based temporal candidate detection, robust background estimates based on the median and median absolute deviation (MAD), a candidate spatial-width fraction derived from channel-specific thresholds, track-direction evidence, and explicit decision rules. Evaluation on 3085 manually labeled matrices acquired from 2023 to 2026 yielded 87.23% accuracy, 87.42% precision, 87.31% recall, and an F1-score of 87.36%. In a secondary analysis, excluding 98 quality-flagged matrices increased precision to 91.28% and F1-score to 89.20%; the exclusion removed 67 of 196 false positives and no false negatives. Relative to the diagnostic-refinement configuration, the final rule set increased F1-score by 2.173 percentage points, with a matrix-level bootstrap 95% confidence interval of 1.437–2.963 percentage points. The exact McNemar test for paired correctness differences gave p = 6.60 × 10−9. A sensitivity configuration changed only four classifications and produced no meaningful gain. These results quantify performance at the tested site; narrow responses, upward-like tracks, data-quality anomalies, single-annotator labels, and post hoc rule selection limit broader inference.
This study investigates tension-induced stress in Cross-tensioned Concrete Pavement (CTCP) during sequential tensioning. An integrated approach combining full-scale field testing and finite element analysis was employed. A field test was conducted to capture the stress distribution throughout the complete tensioning process, and a finite element model was subsequently developed and validated against measured strains. The results indicate that the maximum tensile stress (approximately 1.35 MPa) consistently occurs at the corner of the nearest anchorage zone, which can be completely offset by the compressive stress generated from subsequent tensioning operations. The concept of “prestress effect zone” is proposed to characterize the influence region of each tensioning sequence. In CTCP, the extent of this zone is expected to be influenced by the characteristics of the applied prestress force, including tendon angle, spacing, and magnitude. Based on the distinct tension-induced stress distribution characteristics along the slab, three zones are identified: tensile increase region, tensile stability region, and tensile decrease region, enabling clearer investigation of tension-induced stress. The observed superposition of tensile stresses during sequential tensioning operations highlights the importance of analyzing the development of tension-induced stress throughout the tensioning process, providing essential guidance for anchorage zone design and construction procedures.