Xiaoling Wu

Dr. Xiaoling Wu

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JWJianguang Wang
Jianguang Wang
KZKelin Zhu
Kelin Zhu
XWXiaoling Wu
Xiaoling Wu
CGCheng Guo-an
Cheng Guo-an
RZRuiting Zheng
Ruiting Zheng
Ion implantation is an effective way to control performance in semiconductor technology. In this paper, the fabrication of 1~5 nm porous silicon by helium ion implantation was systemically studied, and the growth mechanism and regulation mechanism of helium bubbles in monocrystalline silicon at low temperatures were revealed. In this work, 100 keV He ions (1~7.5 × 1016 ions/cm2) were implanted into monocrystalline silicon at 115 °C~220 °C. There were three distinct stages in the growth of helium bubbles, showing different mechanisms of helium bubble formation. The minimum average diameter of a helium bubble is approximately 2.3 nm, and the maximum number density of the helium bubble is 4.2 × 1023 m−3 at 175 °C. The porous structure may not be obtained at injection temperatures below 115 °C or injection doses below 2.5 × 1016 ions/cm2. In the process, both the ion implantation temperature and ion implantation dose affect the growth of helium bubbles in monocrystalline silicon. Our findings suggest an effective approach to the fabrication of 1~5 nm nanoporous silicon, challenging the classic view of the relationship between process temperature or dose and pore size of porous silicon, and some new theories are summarized.

26 December 2022 in IEEE Photonics Journal
Verified
Journal Article
Open access
WLWen-Ling Li
Wen-Ling Li
JLJing-Wei Liu
Jing-Wei Liu
CGCheng Guo-an
Cheng Guo-an
RZRuiting Zheng
Ruiting Zheng
XWXiaoling Wu
Xiaoling Wu
High-density and low-crosstalk waveguide arrays are critical components in optical phased arrays (OPAs) and are widely used in solid-state light detection and ranging (LiDAR). In this work, silicon nitride waveguide superlattices with air gaps are proposed and analyzed theoretically. Mode analysis shows that the introduced air gaps beside the waveguide help shorten the skin depth of the evanescent field and increase the effective index range of the waveguide under single mode conditions. Lower crosstalk is demonstrated between a pair of waveguides with air gaps compared with those without air gaps. On this basis, a waveguide superlattice with air gaps is designed by combining the eigenmode expansion method and particle swarm optimization. The crosstalk of the waveguide superlattice is optimized to -24.3 dB when the waveguide pitch is 0.9 $\mu m$ , the propagation length is 1 mm, and the wavelength is 905 nm. The crosstalk is still below -22.4 dB under the typical process variations and over the wavelength range of 890 nm - 920 nm. Therefore, the proposed air-gap waveguide superlattices with high density and low crosstalk offer opportunities to improve the beam steering performance of OPA chips in the near-infrared (NIR) waveband.

26 June 2026 in Thin Solid Films
Verified
Journal Article
Closed access
JLJinxiao Li
Jinxiao Li
LWLei Wu
Lei Wu
LLLin Liu
Lin Liu
XWXiaoling Wu
Xiaoling Wu
CGChungang Guo
Chungang Guo
RZRuiting Zheng
Ruiting Zheng

8 May 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
LLLiu Lin
Liu Lin
JLJinxiao Li
Jinxiao Li
LWLei Wu
Lei Wu
XWXiaoling Wu
Xiaoling Wu
CGCheng Guo-an
Cheng Guo-an
RZRuiting Zheng
Ruiting Zheng
Vanadium dioxide (VO2) films have attracted extensive attention for their pronounced metal–insulator transition (MIT) and multifunctional responses, holding great promise for smart windows, infrared stealth, memristive devices, and advanced sensors. However, conventional approaches for tuning the transition temperature, such as elemental doping or heterostructure engineering, often suffer from complicated processing, impurity phases, and poor device uniformity. Here, we use a dopant-free, high-vacuum annealing (9 × 10−4 Pa, ≈9 × 10−6 mbar) strategy to regulate the intrinsic structural evolution of VO2 films via oxygen-vacancy engineering and to clarify its influence on electrical switching contrast and infrared emissivity modulation. As the annealing temperature increases under low oxygen partial pressure, oxygen vacancies gradually accumulate, converting V4+ to V3+ and driving the films through three distinct structural stages: low-temperature lattice expansion with preserved M1 framework, critical structural collapse at 550 °C, and high-temperature defect rearrangement with local recrystallization. Consequently, the electrical MIT temperature continuously decreases, but the switching ratio collapses at the critical point and only partially recovers after high-temperature reorganization, while the infrared emissivity response transitions from abrupt, phase-transition-dominated switching to a continuous, tunable modulation at elevated temperatures. Notably, the infrared response begins continuous tuning earlier (≈450 °C) than the collapse of electrical MIT, reflecting the different sensitivities of optical and electronic responses to local lattice defects. These results reveal the coupling among oxygen-vacancy evolution, structural stability, electrical contrast, and infrared modulation in compositionally simple VO2 films. Compared with conventional doping, this high-vacuum annealing strategy avoids impurity phases, preserves compositional simplicity, and provides a scalable defect-engineering route to design VO2-based devices with reconfigurable electrical and infrared response modes.