Uwe Wagner

Dr. Uwe Wagner

orcid

Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 July 2022 in Ocean Engineering
Verified
Journal Article
Closed access
MMMohammad Hossein Moradi
Mohammad Hossein Moradi
MBMartin Brutsche
Martin Brutsche
MWMarkus Wenig
Markus Wenig
UWUwe Wagner
Uwe Wagner
TKThomas Koch
Thomas Koch

18 July 2021 in International Journal of Engine Research
Verified
Journal Article
Closed access
PDF file
MMMohammad Hossein Moradi
Mohammad Hossein Moradi
AHAlexander Heinz
Alexander Heinz
UWUwe Wagner
Uwe Wagner
TKThomas Koch
Thomas Koch
To perform a suitable optimization method in terms of emission and efficiency for an internal combustion engine, first highly accurate and possible real-time capable modeling for the transient operations should be provided. In this work, the modeling of NO x and HC raw emission (before exhaust aftertreatment systems) in a six-cylinder gasoline engine under highly transient operation was performed using machine learning approaches. Three different machine learning methods, namely Artificial Neural Network, Long Short-Term Memory, and Random Forest were used and the results of these models were compared with each other. In general, the results show a significant improvement in accuracy compared to other studies that have modeled transient operations. Furthermore, the shortcoming of Artificial Neural Network for the prediction of the HC emission by the transient operation is observed. The coefficient of determination ( R2) for the best model for NO x prediction is 0.98 and 0.97 for the training data and test data, respectively. This value is 0.9 and 0.89 for the best HC prediction model.

23 May 2012 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
JEJohannes Eichmeier
Johannes Eichmeier
UWUwe Wagner
Uwe Wagner
USUlrich Spicher
Ulrich Spicher
The simultaneous reduction of fuel consumption and pollutant emissions, namely NOx and soot, is the predominant goal in modern engine development. In this context, low temperature combustion concepts are believed to be the most promising approaches to resolve the above mentioned conflict of goals. Disadvantageously these combustion concepts show high peak pressures or high rates of pressure rise due to early ignition and high reaction rates especially at high loads. Furthermore, there are still challenges in controlling combustion phasing. In this context using a small amount of pilot diesel injected directly into the combustion chamber to ignite a highly diluted gasoline air mixture can overcome the aforementioned difficulties. As the gasoline does not ignite without the diesel, the pilot injection timing can be used to control combustion phasing. By increasing dilution even high loads with low rates of pressure rise and without knocking are possible. This paper shows the results of experimental investigations carried out on a heavy duty boosted single cylinder diesel engine. Based on the indicated cylinder pressure, the combustion process is characterized by performing knock analyses as well as thermodynamic analyses. Furthermore, an optically accessible engine has been set up to investigate both the diesel injection and the combustion process by means of digital high speed imaging. Together with the thermodynamic analyses the results of these optical investigations make up the base for the presented theoretical model of this combined diesel-gasoline combustion process. To show the load potential of this Dual-Fuel-CAI concept, the engine was operated at 2100 1/min with an IMEP of 19 bar. NOx emissions did not exceed 0.027 g/kWh.

9 April 2021 in Journal of Energy Resources Technology
Verified
Journal Article
Closed access
PDF file
DADominik Appel
Dominik Appel
FHFabian P. Hagen
Fabian P. Hagen
UWUwe Wagner
Uwe Wagner
TKThomas Koch
Thomas Koch
HBHenning Bockhorn
Henning Bockhorn
DTDimosthenis Trimis
Dimosthenis Trimis

27 November 2021
Verified
Book Chapter
Closed access
PDF file
TWThomas Weyhing
Thomas Weyhing
MZMitra Zabihigivi
Mitra Zabihigivi
MMMohammad Moradi
Mohammad Moradi
TMTobias Michler
Tobias Michler
JZJonathan Ziegler
Jonathan Ziegler
TKThomas Koch
Thomas Koch

25 April 2012 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
UWUwe Wagner
Uwe Wagner
USUlrich Spicher
Ulrich Spicher
Increasingly stringent emissions regulations, limited reserves of fossil fuels and CO2-related climate effects have led to the demand for new and diversified engine and vehicle technologies. Compression ignition combustion processes currently offer the highest thermal efficiencies and therefore low specific fuel consumption. Nevertheless, conventional diesel engines face challenges in decreasing NO x and particulate emissions if they are to meet ever more stringent emission regulations. An overview of advanced Diesel technologies and possible ways to address these challenges will be presented in this paper. A recently developed combustion process will be highlighted in detail to demonstrate the emission reduction potential of heterogeneous diesel combustion while maintaining a high thermal efficiency. This combustion process is based on the spatial separation of the different part injections performed during one cycle and offers major advantages in terms of oxygen use, increased exhaust gas recirculation tolerance and significantly lower levels of pollutant formation. This injection strategy is realized by integrating a second injector into the cylinder head of a single cylinder research engine. This second injector is used for the pilot injection and the centrally placed standard injector is used for the main injection. This configuration allows the pilot and main fuels to be injected into different areas of the cylinder. Additionally, the flexible configuration of the proposed injection system allows easy implementation of alternative combustion processes such as homogeneous or partially premixed combustion.