This research was aimed at studying the numerical and experimental characteristics of the air flow impinging on a dimpled surface. Heat transfer enhancement between a hot surface and the air is supposed to be obtained from a dimple effect. In the experiment, 15 types of test plate were investigated at different distances between the jet and test plate (B), dimple diameter (d) and dimple distance (E_r and E_θ). The testing fluid was air presented in an impinging jet flowing at Re = 1500 to 14,600. A comparison of the heat transfer coefficient was performed between the jet impingement on the dimpled surface and the flat plate. The velocity vector and the temperature contour showed the different air flow characteristics from different test plates. The highest thermal enhancement factor (TEF) was observed under the conditions of B = 2 d, d = 1 cm, E_r= 2 d, E_θ = 1.5 d and Re = 1500. This TEF was obtained from the dimpled surface and was 5.5 times higher than that observed in the flat plate.

Microplastics (MPs) are increasingly recognized as emerging contaminants in aquatic environments; however, their occurrence and fate in tropical wastewater treatment systems remain poorly understood. This study provides the first inland–island comparison of MP removal in wastewater treatment plants (WWTPs) across Thailand’s Eastern Economic Corridor. Influent and effluent samples were collected from six WWTPs, encompassing five treatment types: oxidation ditch, aerated lagoon, stabilization pond, aerated tank, and sand filtration combined with reverse osmosis. Polymeric composition and size distribution were examined in parallel with conventional water quality indicators. Across all sites, polyethylene (PE) and polypropylene dominated influent MPs, together accounting for 57–92% of total abundance. Inland plants received heterogeneous municipal wastewater, including domestic inputs and agricultural runoff. In contrast, island facilities consistently showed PE-enriched influents (45–60%) in site F, reflecting tourism-driven reliance on single-use plastics and personal care products. In addition, several minor polymers were identified, including poly (vinyl stearate) (up to 26%), polyamide, polytetrafluoroethylene and ethylene–butyl acrylate, highlighting overlooked pathways of MP entry into WWTPs. Fine MPs (100–300 μm) comprised over two-thirds of influent particles, with stabilization ponds reaching 16,000 MP m⁻³. Removal efficiency ranged from 86.0% to 98.5%. Spearman’s correlation and multiple linear regression analyses revealed strong positive relationships between MPs and both total suspended solids (TSS) and turbidity. Suspended solids parameters emerged as the most reliable predictor of MP abundance (adjusted R² = 0.91, p = 0.001). This finding highlights TSS coupled with turbidity as a practical, cost-effective indicator for monitoring MPs in tropical WWTPs. To achieve greater accuracy, a larger dataset should be built and further analyzed.

This article introduces an inventive holder for endotracheal tubes designed specifically to support neonates with severe respiratory conditions during ventilation. Its primary goal is to minimize the risk of slippage of ventilator tubes in newborns, a critical concern that can lead to complications in their respiratory health. The innovation accommodates endotracheal tube equipment by offering adjustable sizing to match different dimensions. The development process employs computer-aided design (CAD) principles, while prototypes are crafted using three-dimensional (3D) printing technology. Comprising four main components—a support for the endotracheal tube header, a support for the tube unit itself, a flexible structure for tube positioning, and a stabilizing base—the innovation demonstrates structural strength and suitability within predefined parameters. It effectively supports the endotracheal tube apparatus while providing flexibility in positioning and distance adjustments. Importantly, its height can be tailored to suit the newborn’s head, offering adaptability for optimal usage. This research supports Sustainable Development Goals (SDGs) 3 and 9 relating to “Good health and well-being” and “Industry, innovation and infrastructure”.