A two‐layer (connected by stubs) partial composite plate is a structure with outstanding advantages which can be widely applied in many fields of engineering such as construction, transportation, and mechanical. However, studies are scarce in the past to investigate this type of structure. This paper is based on the new modified first‐order shear deformation plate theory and finite element method to develop a new four‐node plate element with nine degrees of freedom per node for static bending and vibration analysis of the two‐layer composite plate. The numerical results are compared to published data for some special cases. The effects of some parameters such as the boundary condition, stiffness of the connector stub, height‐to‐width ratio, thickness‐to‐thickness ratio between two layers, and aspect ratio are also performed to investigate new numerical results of static bending and free vibration responses of this structure.
22 October 2016 in Multidimensional Systems and Signal Processing
Traditionally, concrete surface cracks are manually measured and recorded by experienced inspectors who observe cracks with their naked eye. This task is very costly, time-consuming and dangerous. Some automatic crack detection techniques utilizing image processing have been proposed. However, it is very difficult to automatically identify cracks sufficiently fast and accurate. This paper presents a novel automatic algorithm for effectively identifying cracks in concrete structures, which can be applied to high resolution photographs. Firstly, as cracks can be considered as elongated dark objects in concrete surface images, all dark objects are roughly identified using Isotropic Undecimated Wavelet Transform (IUWT) and morphological image processing. Secondly, all previous detected dark objects are classified into crack and non-crack objects by analyzing their cross section pixel intensity profiles, which are computed perpendicularly across their centre-lines in the original input image, using a novel method based on Savitzky-Golay filter. Therefore, both local and global changes in crack width can be readily quantified. Experiments show that our method can automatically detect true cracks in concrete surface images using a unique set of parameters.
The extraction of crack images is an important process in the area of structural health monitoring for determining the severity of the damage induced by cracks. In this paper, a radial basis functions (RBFs) based level set interpolation technique is proposed to extract the images of cracks in structures. In the proposed method, the level set in the form of radial basis functions with an ellipse constraint can represent accurately various shapes without requiring building interior and exterior layers for the sparse mesh grid of RBFs centers or using information on contour/surface normal. The initial distance function embedded in the ellipse-constrained RBFs can be interpolated on a much coarser grid. Its deformation is considered as an updating of the RBFs coefficients by solving an ordinary differential equation (ODE) and a non-convex quadratically constrained quadratic programming (QCQP). The use of a semi-definite relaxation technique in solving the non-convex QCQP problem has shown that initialization and re-initialisation are no longer necessary. The images of a number of cracks have been extracted using the proposed method. It has been shown that the proposed method can extract crack images efficiently with coarse grid of RBFs centers and is also less sensitive to the distribution of the crack images in the domain.