The Cox-Merz rule is an empirical relationship that is commonly used in science and industry to determine shear viscosity on the basis of an oscillatory rheometry test. However, it does not apply to all polymer melts. Rheological data are of major importance in the design and dimensioning of polymer-processing equipment. In this work, we investigated whether the Cox-Merz rule is suitable for determining the shear-rate-dependent viscosity of several commercially available high-density polyethylene (HDPE) pipe grades with various molecular masses. We compared the results of parallel-plate oscillatory shear rheometry using the Cox-Merz empirical relation with those of high-pressure capillary and extrusion rheometry. To assess the validity of these techniques, we used the shear viscosities obtained by these methods to numerically simulate the pressure drop of a pipe head and compared the results to experimental measurements. We found that, for the HDPE grades tested, the viscosity data based on capillary pressure flow of the high molecular weight HDPE describes the pressure drop inside the pipe head significantly better than do data based on parallel-plate rheometry applying the Cox-Merz rule. For the lower molecular weight HDPE, both measurement techniques are in good accordance. Hence, we conclude that, while the Cox-Merz relationship is applicable to lower-molecular HDPE grades, it does not apply to certain HDPE grades with high molecular weight.
Corrugated pipes offer both higher stiffness and higher flexibility while simultaneously requiring less material than rigid pipes. Production rates of corrugated pipes have therefore increased significantly in recent years. Due to rising commodity prices, pipe manufacturers have been driven to produce corrugated pipes of high quality with reduced material input. To the best of our knowledge, corrugated pipe geometry and wall thickness distribution significantly influence pipe properties. Essential factors in optimizing wall thickness distribution include adaptation of the mold block geometry and structure optimization. To achieve these goals, a conventional approach would typically require numerous iterations over various pipe geometries, several mold block geometries, and then fabrication of pipes to be tested experimentally—an approach which is very time-consuming and costly. To address this issue, we developed multi-dimensional mathematical models that predict the wall thickness distribution in corrugated pipes as functions of the mold geometry by using symbolic regression based on genetic programming (GP). First, the blow molding problem was transformed into a dimensionless representation. Then, a screening study was performed to identify the most significant influencing parameters, which were subsequently varied within wide ranges as a basis for a comprehensive, numerically driven parametric design study. The data set obtained was used as input for data-driven modeling to derive novel regression models for predicting wall thickness distribution. Finally, model accuracy was confirmed by means of an error analysis that evaluated various statistical metrics. With our models, wall thickness distribution can now be predicted and subsequently used for structural analysis, thus enabling digital mold block design and optimizing the wall thickness distribution.
Corrugated pipes are a widely used for drainage pipes, automotive applications, and in medical engineering. In contrast to normal pipes, corrugated pipes exhibit higher stiffness and simultaneously higher flexibility by less material demand. Due to rising commodity prices and the plastic usage debate, it is of great interest to produce corrugated pipes with high quality and low material input. One major factor to manipulate the wall thickness distribution is to adapt the mold geometry. This research investigates the wall thickness distribution depending on the mold geometry. Therefor, we carried out a comprehensive parametric design study with a vast number of 2D-axisymmetric Finite Element Method (FEM) blow-molding simulations. All independent geometry parameters and the initial fluid parison thickness were varied within a wide range. Based on the data set derived by the parametric design study, we analyzed the relationships between the mold geometry and the wall thickness distribution. These key findings are crucial for the mold and pipe design with respect to optimized wall thickness distribution. In the next step, these data will be validated by experiments on a corrugated pipe plant with different molds. Moreover, an extensive multi-dimensional regression model describing the wall thickness distribution as a function of the mold geometry is planned.
Corrugated pipes are light in weight, but strong and flexible with considerably lower material demand compared to rigid pipes. The mechanical properties are mainly determined by the wall thickness distribution that is majorly governed by the mold geometry and the blowing parameters. Prediction of the wall-thickness distribution and subsequently achievable mechanical performance are one of the most critical aspects when designing a corrugated pipeline. Due to the scarcity of resources and cost pressure, efficient use of raw material is of increasing importance. It is therefore desired to produce corrugated pipes that meet the standards and requirements of the customer with minimal raw material input. To address these issues, first, multi-dimensional regression models for predicting the wall thickness distribution in corrugated pipes as function of the mold geometry and initial parison thickness were developed via symbolic regression modelling based on genetic programming. These models are based on a parametrically driven numerical blow molding simulation study. To ensure the reliability and performance of the created pipe geometry, the next step was to perform a finite element (FE) mechanical analysis and evaluate the ring stiffness of the pipe indicating of pipe strength. The obtained simulation results provide a correlation between the mold geometry and the mechanical strength of the corrugated pipe. These results will help to develop guidelines for producing a lightweight corrugated pipe that has the required mechanical performance with minimal material need, thus making an important contribution to sustainability and resource conservation.