Steering a nonlinear system from an initial state to a desired one is a common task in control. While a nominal trajectory can be obtained rather systematically using a model, for example, via numerical optimization, heuristics, or reinforcement learning, the design of a computationally fast and reliable feedback control law that guarantees bounded deviations around the found trajectory can be much more involved. An approach that does not require high online computational power and is well‐accepted in industry is gain‐scheduling. The results presented here pertain to the boundedness guarantees and the set of safe initial conditions of gain‐scheduled control laws, based on subsequent linearizations along the reference trajectory. The approach bounds the uncertainty arising from the linearization process, builds polytopic sets of linear time‐varying systems covering the nonlinear dynamics along the trajectory, and exploits sufficient conditions for the existence of a robust polyquadratic Lyapunov function to attempt the derivation of the desired gain‐scheduled controller via the solution of linear matrix inequalities (LMIs). A result to estimate an ellipsoidal set of safe initial conditions is provided too. Moreover, arbitrary scheduling strategies between the control gains are considered in the analysis, and the method can also be used to check/assess the boundedness properties obtained with an existing gain‐scheduled law. The approach is demonstrated experimentally on a small quadcopter, as well as in simulation to design a scheduled controller for a chemical reactor model and to validate an existing control law for a gantry crane model.
The rapidly increasing availability of low-cost commercial UAVs poses significant security challenges for critical infrastructure and law enforcement agencies. This paper presents an integrated LiDAR-based detection and vision-based verification system for an autonomous drone-on-drone aerial interception system. To eliminate the threat of possible dangerous target drones, the interception UAVs presented in this paper use a net to capture them safely in the air. The system addresses the critical limitation of ground-based sensors, which provide insufficient precision for reliable net-based capture operations. Moving beyond simulation-only approaches, the core novelty of this work lies in the successful real-world integration of these sensors on a strictly constrained aerial platform in size, weight and power to achieve sub-meter terminal guidance precision. The developed system uses real-time point cloud processing, DBSCAN clustering, and Moving Horizon Estimation tracking for the detection and tracking of the target. Vision-based verification uses a custom-trained YOLO neural network and achieves over 90% detection rates. The evaluation demonstrates a detection accuracy of less than 0.4 m at ranges exceeding 40 m during dynamic interception scenarios using RTK-GNSS ground truth. The dual-sensor approach successfully completed multiple autonomous interception missions with target detection ranges of up to 60 m, validating the capability of the system for safe, autonomous civilian UAV interception.
Steering a nonlinear system from one state to a desired one is a common task in control. While a nominal trajectory can be obtained rather systematically using a model, for example via numerical optimization, heuristics, or reinforcement learning, the design of a computationally fast and reliable feedback control law that guarantees robust asymptotic stability of the found trajectory can be much more involved. An approach that does not require high online computational power and is well-accepted in the industry is gain-scheduling. The results presented here pertain to the stability guarantees and the region of attraction of gain scheduled control laws, based on subsequent linearizations along the reference trajectory. The approach bounds the uncertainty arising from the linearization process, builds polytopic sets of linear time varying systems covering the nonlinear dynamics along the trajectory, and exploits sufficient conditions for robust stability to attempt the derivation of the desired gain-scheduled controller, via the solution of Linear Matrix Inequalities (LMIs). A result to estimate an ellipsoidal region of attraction is provided too. Moreover, arbitrary scheduling strategies between the control gains are considered in the analysis, and the method can be used also to check/assess the stability properties obtained with an existing gain-scheduled law. The approach is demonstrated experimentally on a small quadcopter as well as in simulation to design a scheduled controller for a chemical reactor model and to validate an existing control law for a gantry crane model.