Thermal camouflage has been successful in the conductive regime, where thermal metamaterials embedded in a conductive system can manipulate heat conduction inside the bulk. Most reported approaches are background-dependent and not applicable to radiative heat emitted from the surface of the system. A coating with engineered emissivity is one option for radiative camouflage, but only when the background has uniform temperature. Here, we propose a strategy for radiative camouflage of external objects on a given background using a structured thermal surface. The device is non-invasive and restores arbitrary background temperature distributions on its top. For many practical candidates of the background material with similar emissivity as the device, the object can thereby be radiatively concealed without a priori knowledge of the host conductivity and temperature. We expect this strategy to meet the demands of anti-detection and thermal radiation manipulation in complex unknown environments and to inspire developments in phononic and photonic thermotronics.

The first multiphysical invisible sensor is theoretically and experimentally presented. An ultrathin, homogeneous, and isotropic shell is designed to simultaneously manipulate heat flux and DC current and eliminate the multiphysical perturbation, while maintaining the receiving and transmitting properties of the sensor.

A nonlinear energy sink (NES) approach is proposed for whole-spacecraft vibration reduction. Frequency sweeping tests are conducted on a scaled whole-spacecraft structure without or with a NES attached. The experimental transmissibility results demonstrate the significant reduction of the whole-spacecraft structure vibration over a broad spectrum of excitation frequency. The NES attachment hardly changes the natural frequencies of the structure. A finite element model is developed, and the model is verified by the experimental results. A two degrees-of-freedom (DOF) equivalent model of the scaled whole-spacecraft is proposed with the two same natural frequencies as those obtained via the finite element model. The experiment, the finite element model, and the equivalent model predict the same trends that the NES vibration reduction performance becomes better for the increasing NES mass, the increasing NES viscous damping, and the decreasing nonlinear stiffness. The energy absorption measure and the energy transition measure calculated based on the equivalent model reveals that an appropriately designed NES can efficiently absorb and dissipate broadband-frequency energy via nonlinear beats, irreversible targeted energy transfer (TET), or both for different parameters.